Replacement Hitch Pin to Use When Converting Yakima Holdup to 1-1/4 inch Hitch

Question

Question:

If I purchase this item to convert my 1 1/4 rack for 2inch hitch Replacement Tongue for Yakima HoldUp Bike Racks Item # 8880580 Do I also need to buy a replacement pin?

asked by: Heather

0

Expert Reply:

Yes, the Holdup for 1-1/4 inch hitches requires a different, smaller hitch pin. For that you'd need the part # Y90195 which comes with the new wrench you'd need and the smaller hitch pin for use with the # 8880580.

expert reply by: Jameson C

0

Answer 1

In order to converter a Yakima HoldUp for 1-1/4" to a Yakima HoldUp for 2" you will need the Replacement Tongue for Yakima HoldUp Bike Racks part #8880580 and the Replacement Hitch Bolt part #Y8890200. The lock core housing can be reused.

view full answer...

Answer 2

In order to convert your Yakima HoldUp #Y02445 to be compatible with a 2 inch hitch, you would only need the Replacement Tongue for Yakima HoldUp Bike Racks #8880580, which is a 2 inch tongue.

view full answer...

Answer 3

I sent your photo in to Yakima and they confirmed it is the Yakima Terrafirma 4-bike rack, which was discontinued 15 years ago and is model 8002576. They told me the threaded attachment bolt that works is Replacement Hitch Bolt and Clip #Y8890200;…

view full answer...

Answer 4

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.

view full answer...

Answer 5

For your ProRack 4-bike carrier you will actually need Replacement Hardware for Rhode Gear Highway Bike Carriers #RG890247. The pin itself is not available as a replacement part; only this kit. But on the plus side it never hurts to have spare…

view full answer...

Answer 6

Thanks for the picture of hitch pin, but what was really helpful was actually the set of instructions you have in the background. Based on that you have the first version of the BigHorn which was made around 2001 and the correct hitch pin replacement…

view full answer...

Answer 7

The Yakima HoldUp 2 Bike Rack for 2" Hitches - Platform Style - Tilting #Y02443 is different from the Yakima HoldUp EVO 2 Bike #Y02479 in a couple ways. The original could hold bikes up to 60 lbs each versus the EVO holding up to 50 lbs per…

view full answer...

Answer 8

To convert your Yakima HoldUp 2 Bike Rack for 2" Hitches #Y02443 so that it will fit a 1-1/4" hitch receiver you need the Replacement Tongue #8880581 along with the Hardware Kit #Y90195. Please note that when using this smaller tongue you…

view full answer...

Answer 9

Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly #8880580. Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt #8890200 to secure the…

view full answer...

Answer 10

Yes, we do have it. The Replacement Tongue for Yakima HoldUp Bike Rack #8880580 will fit your 2012 Vintage Yakima HoldUp Bike Rack.

view full answer...

Answer 11

I have a solution for you but the Replacement Hitch Adapter #Y8890174 will not work for your Yakima Holdup #Y02445. We have the 2-inch replacement tongue you can install on your bike carrier. It is part #8880580. Or, if you prefer to replace the…

view full answer...

Answer 12

The good news is the Replacement 2" Hitch Shank for Yakima HoldUp Bike Racks #8880580 is the confirmed correct part from Yakima to convert your HoldUp to a 2" shank. According to Yakima, you're also going to need the Replacement Hitch…

view full answer...