Comparing the Yakima HoldUp Original to the Yakima HoldUp EVO

Question

Question:

What is the size difference between the Yakima Holdup and the newer version-the Yakima Holdup Evo?

asked by: Daniel

0

Expert Reply:

The Yakima HoldUp 2 Bike Rack for 2" Hitches - Platform Style - Tilting # Y02443 is different from the Yakima HoldUp EVO 2 Bike # Y02479 in a couple ways.

The original could hold bikes up to 60 lbs each versus the EVO holding up to 50 lbs per bike. The original could hold bike tires up to 2-1/2 inches wide versus the Evo holding tires 5 inches wide. The biggest difference is the new KickStart foot lever to tilt and fold the rack. The size and weight of the rack itself in all other ways is almost the same.

expert reply by: Jason S

0

Answer 1

In order to converter a Yakima HoldUp for 1-1/4" to a Yakima HoldUp for 2" you will need the Replacement Tongue for Yakima HoldUp Bike Racks part #8880580 and the Replacement Hitch Bolt part #Y8890200. The lock core housing can be…

view full answer...

Answer 2

Yes, the Yakima HoldUp 4 Bike Platform Rack #Y02443-2 will work with bikes that have wheels from 20 - 29 inches in diameter, so it will easily accommodate both your children's bike with 20 inch wheels, and your bike with 27.5 inch wheels as…

view full answer...

Answer 3

We do have the correct part for you, but the 8880833 is only a fit for the Yakima HoldUp EVO Bike Rack , as opposed to the standard Yakima HoldUp bike rack. Based on your photo, you do not have the EVO, you have the standard HoldUp. The arms are…

view full answer...

Answer 4

The Yakima Holdup part #Y02443 that you referenced is designed to fit wheels that are between 14 and 29 inches in diameter. There isn't an adapter available to allow the rack to fit larger tires, but you can try deflating the tires a bit to…

view full answer...

Answer 5

Yes, we do have it. The Replacement Tongue for Yakima HoldUp Bike Rack #8880580 will fit your 2012 Vintage Yakima HoldUp Bike Rack.

view full answer...

Answer 6

Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly #8880580. Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt #8890200 to secure…

view full answer...

Answer 7

In order to convert your Yakima HoldUp #Y02445 to be compatible with a 2 inch hitch, you would only need the Replacement Tongue for Yakima HoldUp Bike Racks #8880580, which is a 2 inch tongue.

view full answer...

Answer 8

The Yakima HoldUp 2 Bike Hitch Mounted Folding Rack #Y02443 that you referenced will work on bikes that have tires that are up to 29 inches in diameter. The other capacity to keep in mind is the 120 lb weight capacity of the carrier. I attached a…

view full answer...

Answer 9

I checked with Yakima and they never made a bike rack called the StandUp. Are you possibly referring to the HoldUp #Y02443? If so, the replacement shank for a 2 inch hitch is the part #Y8890278 for black or part #Y80126 for gray.

view full answer...

Answer 10

The Torque Specification is found in the installation instructions on our product page on the etrailer #e98846 receiver hitch. A Torque Wrench #PT87ZR would be the type that you would need to achieve that rating.

view full answer...

Answer 11

The solid blue light on the Curt Echo #C51180 means that the controller is paired to your smart device but the controller isn't sensing that the trailer is connected. Since your trailer was working just fine a few weeks ago and the controller is…

view full answer...

Answer 12

Yes the Yakima HoldUp EVO Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #Y02479 offers 13-1/2" from the pin hole to the nearest part of the rack. This means you will have 5" between the rear of your vehicle and the rack. However you…

view full answer...