Measurement of Valterra RV Sewer Elbow with Rotating Flange

Question

Question:

I would like to know the overall length of the fitting from the sealing flange to the outside of the press fit flange. This measurement would be made perpendicular to the gate valve flange.

asked by: Ray P

1

Helpful Expert Reply:

The attached image was helpful in easily identifying exactly what measurement you wanting on the Valterra RV Sewer Elbow with Rotating Flange, # T1035-2. It is 5-5/16".

expert reply by: Michael R

1

T1035-2_003
(click to enlarge)

T1035-2_Image
(click to enlarge)

Answer 1

The closest match that we have is the Valterra #T1035-2 RV Sewer Elbow. The internal measurement on the spigot end is 3" and is meant for a glued connection rather than a push together connection with an o-ring.

view full answer...

Answer 2

Yes, the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank #E40B-8 can be oriented sideways so it's able to open up under your trailer. The 3" to 3" hubs mentioned in the description are included with the valve. These are…

view full answer...

Answer 3

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 4

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 5

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Answer 12

The Lippert Components Spare Tire Winch with Offset Cable #LC159056 will not have any locking or hold mechanism short of being completely reeled in. I spoke to my tech contact at Lippert who has this on his truck and he said you just crank it up…

view full answer...

Measurement of Valterra RV Sewer Elbow with Rotating Flange

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching