Valterra ABS Solvent Cement Review Video

The lugs of a sewer pipe fitting can not be fixed so you would have to completely replace the fitting. To do that you'll have to first empty out the tank, which since your lug fitting has broken off will require you to hold the hose in place…

Plumbing parts are interchangeable on RV's just as long as the fittings are the correct size. I couldn't find that exact part number but I believe I have found the Valterra equivalent. If the Bristol valve you are talking about uses…

I went out to the warehouse to look at the two extension tubes included in the Valterra Waste Valve Extension Rod Kit #T1046-12VP referenced in your question. The rods are threaded all the way through on the inside, so while they were not designed…

The closest thing I was able to find that is to what you're looking for is the: -Trailer Wheel Center Cap Plug #AM90081. This wheel center plug will fit center caps that have an outer diameter of 2.95" to 5.15", has an O.D of…

If the center cap of your rim is 1-7/8 inch in diameter the #AM90081 that you referenced will fit it and work well. That's pretty small though so I would be surprised if it worked for you application since it's used as a center for a cap that…

So the difference is purely in how the two connect to your sewer pipe, which will also tell you which one you need; one will slide into the pipe (the spigot) while the other will slide onto the pipe (the hub): - Slide Into Pipe: Valterra Waste Valve…

It sounds like you have a heating pad like the ThermaHeat RV Holding Tank or Step Heater Pad w/ Thermostat #277-000164. I reached out to my contact at Lasalle Bristol and they recommend using 3M Hi Strength 90 spray adhesive to reattach the pad to…

When gluing together Valterra RV sewer pipes like the #T1028 you'd need to use an ABS solvent cement like the part #A05-0303.

No they will all mount differently. For example, LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable, part #34466N4BB96GM, needs ABS solvent cement, part #3447530889, to secure the valve to your sewer…

From the looks of your attached photo, you need a black water and gray water elbow valve for your trailer. The closest thing we have for the setup is the Bristol Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1.5" Hub to 3"…

The LaSalle Bristol #34466ND14AAR Waste Valve is the female version where the black water inlet is 3-1/2" INSIDE diameter, whereas the #3446ND14BBR has a 3-1/2" OUTSIDE diameter. I have attached a photo with dimensions of the female…

The adapter you need is the Valterra part #T1041-1 that you referenced as it fits your configuration needs. The 3 inch portion fits into the tank and then the 1-1/2 inch portion fits over the elbow fitting like you need. Rubber cement is basically…