Replacement Wheel Tray For Swagman XTC2 Bike Rack

Question

Question:

I have a Swagman XTC2 Bike rack and need one wheel tray. Can you get one and how much is it?

asked by: Marc H

1

Helpful Expert Reply:

For your Swagman XTC2 Bike Rack for 2 Bikes # S64670 we do offer a replacement for your wheel tray with the Replacement Wheel Hoops for Swagman XTC Series Bike Carriers # P318.

All of our stock, and pricing info is located on our product pages.

expert reply by: Bryce D

1

Answer 1

The only way to know which tray you need is to know the model of your Swagman bike rack; I will list out each of the replacement options we have so you can find the correct replacement tray for your rack. - Swagman Semi & Swagman Escapee:…

view full answer...

Answer 2

Yes, you can put the XTC wheel hoops, #P318, on the XC model rack, #S64664. There is a version of this rack that has this set up already, #S64650-EXT, which you mentioned, but it is not a towing bike rack. With the XTC wheel hoops mounted the maximum…

view full answer...

Answer 3

According to Swagman, the wheel hoops from your Swagman XTC #S64670 could be used on a Swagman XC #S64650. I will say that the hoops on the XTC are much more sturdy, and I'd recommend staying with those if at all possible. If the existing XTC…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...