bing tracking image
  1. Trailer Leaf Springs
  2. etrailer
  3. Slipper Springs
  4. 27 Inch Long
  5. 2 Inch Wide
  6. 6000 lbs
5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long

5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long

Item # e67SR
Our Price: $67.99
Trailer Leaf Springs
Shipping Weight: 19 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Great Prices for the best trailer leaf springs from etrailer. 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long part number e67SR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (28)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Springs - e67SR

  • Slipper Springs
  • 27 Inch Long
  • 2 Inch Wide
  • 6000 lbs
  • 5 Leaf
  • Painted
  • Hook End
  • etrailer

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


Features:

  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushings included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Eye of spring attaches to hanger mounted on trailer frame at one end
    • Slipper end slides into hanger or equalizer


Specs:

  • Quantity: 1 leaf spring
  • Spring capacity: 3,000 lbs
  • Axle capacity: 6,000 lbs
  • Length from center of spring eye to center of spring eye (unloaded): 27"
  • Spring width: 2"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 5
  • Additional dimensions: see table


Hook End Slipper Spring Diagram

Part Number A B C D E F
e67SR 11-7/8" 24-1/4" 27" 12-3/4" 15-3/4" 3-1/2"


Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.


Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.


Slipper leaf springs attach to hangers that are welded onto your trailer. The eye of this spring will attach to the front hanger with a suspension bolt. The hooked slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs. The shape of the slipper end of a leaf spring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leaf spring's slipper end before purchasing a replacement spring.


To mount this spring, you will need hangers, a suspension bolt, and possibly a spring keeper bolt. If you are simply replacing a spring, you may still have hangers welded onto your trailer, but it would be wise to replace the bolts as they can experience wear. It is also recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.


If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.



e67SR etrailer Slipper Trailer Leaf Spring - 5 Leaf - 3,000-lb Capacity

Compares to SP-160275





Customer Satisfaction Score:


Customer Reviews

5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long - e67SR

Average Customer Rating:  4.6 out of 5 stars   (28 Customer Reviews)

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

by:

This leaf spring fit perfectly and was easy to install! Good quality and I have not had any issues with it and have used the trailer for nearly a year after installation.



by:

Correct item at the right price, but very disappointed about shipping times. When I ordered the part it said that the UPS ground option would arrive on 4/18. After I placed the order the shipping information updated to arriving on 4/22. I needed this leaf spring for my work trailer and time is money. Again, a good price and good part, but if timing is sensitive, I'll be considering other options in the future.



by:

Very wonderful and knowledgeable about parts and got parts ordered and paid for and received them very quickly , very happy this place is open on sundays and will use this company again!! Again thank you !!!



by:

Can't imagine in today's world how you got parts delivered so quickly. Thanks for the information and the great support.



by:

Delivered quickly



by:

Good spring at a good price, fast shipp ing



by:

Already on trailer. Super fast delivery and look to be a quality part.



by:

Good price and fast shipping



by:

Etrailer Expert

Brooke M.

4/14/2023

It looks like your experience with the product or with shopping at etrailer could have gone better. If you would like to add any comments to your review, please let us know!



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
28
Show More Reviews

See what our Experts say about this etrailer Trailer Leaf Springs

  • Recommended 2 Slipper Spring Hanger Kit For Tandem Axle Trailer W/ 5200-7000lb Axles
    Slipper springs are pretty common on tandem axle trailers with heavy duty axles like yours, and I recommend sticking with them as there are limited double eye springs for axles 5200lb+ like yours. The Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers # AP216-H238 you were looking at are a great choice as it includes 5" tall front hangers, 6-3/8" tall rear hangers, and 13-1/8" long equalizers that attach to 4-1/2" tall center hangers so it will be very close...
    view full answer...
  • 27 Long Slipper Springs for a Boat Trailer
    We do have 27" slipper springs. They are the 5-Leaf Slipper Spring w/ Hook End item # e67SR. These springs are 2" wide and have a 3,000 lbs capacity per spring. They have 5-leafs instead of your 3 but will work just fine on your boat trailer if your current springs are 2" wide. The closet springs we have that are only 1-3/4" wide are the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles item # e33SR. These are 26-1/4" long.
    view full answer...
  • How Are Slipper Springs Attached to Equalizer and Hangers
    The slipper spring hook of a slipper spring like part # e67SR attaches to the equalizer and the eye of the spring attaches to the hangers of Tandem-Axle trailer hanger kit part # APT6SE. I have attached a diagram of how slipper springs are setup. I have also attached a very helpful article that explains slipper spring setups.
    view full answer...
    Image 1 for
  • Troubleshooting End of Slipper Spring Popping Out on 2023 Outlaw Gooseneck Flatbed Trailer
    The picture with the torn up bushing looks like the eye of your slipper spring. Is that correct? If so, it is coming undone and probably the reason you're having this problem. It should be enclosed and not look similar to the hook on the end of the slipper spring. Replacing your leaf springs will likely solve the issue. This is a new 2023 trailer so you also might want to check to see if the dealer is willing to cover any repairs. That isn't exactly normal unless you're grossly overloading...
    view full answer...
    Image 1 for
  • How To Determine The Correct Leaf Springs For A Gooseneck Trailer
    The first step here would be to find the axle capacity so that you can get the correct capacity leaf springs. If there isn't any tags/stickers/labels on the axle to indicate the capacity then you can measure the diameter of the axle to figure out a general weight capacity. Below is the typical capacity of an axle based on the diameter. 1,000-lb - 2,000-lb Axles: 1-1/2" - 1-3/4" diameter 3,500-lb Axles: 2-3/8" diameter (can have a 3-1/2" diameter, but rarely) 6,000-lb - 7,200-lb Axles:...
    view full answer...
    Image 1 for Image 2 for
  • Single Slipper Spring for Tandem 6000 Pound Axles 2 Inches Wide
    To determine the appropriate replacement slipper spring you would need there are a few measurements that are crucial. In order to get these measurements the current spring cannot have a load on it. If you have already removed the slipper spring from the trailer that works great. Or you can measure while it is on the trailer, just make sure that when you jack the trailer up you do so by the trailer frame. Also, make sure it is safe and secure before taking your measurements. The measurements...
    view full answer...
  • Recommended Replacement Leaf Slipper Springs for 27-1/4 inch Leaf Slipper Springs
    Yes, what you described sounds exactly like a leaf slipper spring. Since you want to go by the eye-to-eye, or in your case open-eye, measurement I recommend the 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles # e67SR. This leaf slipper spring is rated for 6,000 lbs and has an eye-to-open-eye measurement of 27 inches. The extra 1/4 inch that you measured is nothing to be worried about since leaf springs can tend to stretch out a little bit over time. I am attaching a demonstration...
    view full answer...
  • Parts Needed To Switch From Double Eye Leaf Springs To 2 Wide Slipper Springs
    Since you are switching to 2" wide Slipper Springs # e67SR you will need an entire hanger kit like the Tandem-Axle Trailer Hanger Kit # AP202-H202. As your trailer had double eye springs the hangers are only 1-3/4" wide. These slipper springs used with the hanger kit will need the hangers placed 29-3/4" on center and will place the axles 34-1/2" on center. The 10-1/8" equalizers are the shortest we carry for 2" wide slipper springs.
    view full answer...
  • How to Determine the Correct Slipper Spring for 6,000 lb Axle
    The slipper spring we carry for 6,000 lb axles is the 5-Leaf Slipper Spring w/ Hook End # e67SR. To figure out if this spring is going to work for you there is a measurement you will need to take. If you look at the accompanying diagram you can see that "C" is 27 inches. This is the length from the center of the eye to the end of the spring with the slipper; you can measure your current slipper spring to see if you have a similar measurement, keeping in mind that the current spring may...
    view full answer...
    Image 1 for
  • Distance to Set Hangers of Slipper Spring Hanger Kit with Slipper Spring e67SR
    With the Slipper Spring Single Axle Hanger kit part # HAP-105-00 and the Slipper Springs part # e67SR you'd want to set the hangers at a distance of 24-1/4 inches apart.
    view full answer...
  • How to Determine Correct Replacement Slipper Springs
    In order to find the correct replacement slipper spring you will need the length, width, and the capacity. The leaf count does not indicate capacity and is not important when determining a replacement. This information would also make a difference in the mounting hardware. For example, the 4-Leaf Slipper Spring w/ Open Eye End # e24SR is 27" long, 1-3/4" wide, and designed for 4,300 lb axles. Assuming a single axle, you could use the # APS3SE and # APUBR-1 (this is for a 2-3/8" diameter...
    view full answer...
  • How to Determine Hanger Spacing on a Tandem Axle Trailer with 6K Axles and Slipper Spring Suspension
    The hanger spacing is going to depend on a few things including the spring measurements and the equalizers being used. But if you were using spring # e67SR the distance between the hangers would be around 29-3/4 inches. However this is using hanger kit # AP202-H202 with 10-1/8 inch equalizers. If you were using kit # AP216-H202 the hanger spacing guideline would be 31-1/2 inches because the equalizers are longer. So you can see that it changes depending on the components being used. Also,...
    view full answer...
  • Does Tandem Axle Slipper Spring Hanger Kit # APT6SE-36 Work with Springs that are 2 inches Wide
    We have one 6,000 lb axle rated slipper spring that is 2 inches wide. For that you would want the part # e67SR that is 27 inches long. The ends of this spring are hooked but do not come all the way back around like a C shape like what it sounds like you have. However, both styles are acceptable and will install in the same way. The tandem axle hanger kit part # APT6SE-36 that you referenced will work with what you have since you said your springs are 2 inches wide. I also attached a link...
    view full answer...
  • Replacement Slipper Spring for 24-1/4 From Center Eye to Front of Rear Hanger
    Thank you for the pictures and the explanation! The leaf spring that fits the spacing you have is the 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles # e67SR. If you check out the attached photo the "B" dimension is 24-1/4" which is measured from the center of the bolt hole eye to the front of the rear hanger. Since it looks like your rear hanger is about 1-1/2" long this puts you about at the 24-1/4" mark and means this slipper spring will fit!
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Which Trailer Suspension Hanger Kit Do I Need For 27 Long x 2 Wide Slipper Spring On 6000-lb Axle
    To mount your 27" long slipper springs # e67SR you'll need to choose between a kit for single axle trailers or a tandem axle trailer. If you have a single axle trailer you'll want to use the Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front # APS6SE. If you have a tandem axle trailer you'll want to use the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers # APT6SE. Since these kits do not come with the mounting bolts to secure the springs...
    view full answer...
  • Recommended Slipper Spring Suspension for 10,000 Pound Trailer
    For Slipper Springs to install on your trailer that will have a maximum load of around 10,000 pounds, I recommend either the 5-Leaf Slipper Spring w/ Hook End for 6,000 pound Axles # e67SR or the 4-Leaf Slipper Spring for 5,000 Pound Axles # SP-231275, depending on the actual axle capacity for your trailer. Then for a hanger kit, which will work for either of the Slipper Springs mentioned above, I recommend the Tandem-Axle Trailer Hanger Kit for 2 Inch Slipper Springs # AP216-H202. This...
    view full answer...
    Image 1 for
  • How to Determine Which Springs Will Replace the Ones on a 5,100 Pound Dexter Axle
    To replace the springs on your travel trailer, we will need to know a few things. First, we will need to know if the springs are slipper style springs, like the 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles # e67SR, or double eye springs, like the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e78SR. From there, you will need to measure your current springs. If you have double eye springs, you will measure from the center of one eye to the center of the other eye....
    view full answer...
  • Determining Correct Replacement Leaf Spring For Tandem Axle Gooseneck Trailer W/ Mobile Home Axles
    I am sorry to hear your axle broke! I do not have an exact answer on why your axle broke in the manner it did, but unless you notice that your springs are completely worn out I wouldn't say it was caused by the springs. I will say that mobile home axles are really designed for one time use, and are not always made to the highest standard for longevity. If your springs are worn out, I would be happy to recommend a replacement for you but I will need to know the length and width of current...
    view full answer...
    Image 1 for Image 2 for
  • Recommended 27 inch Leaf Spring for my Trailer
    If you are looking for a Leaf Spring that is 27-3/4 inches long, the closest that we offer in length is 27 inches. If your springs are worn, it is possible they were originally 27 inches long and have flattened out over time. We have a Double-Eye 4-Leaf Spring # SP-210275 that is rated for 3,500 lb Trailer Axles. This spring measures 1-3/4 inches wide and the leaf thickness is 3/8 of an inch. We also have the 5-Leaf Slipper Spring with Hook End # e67SR which is rated for 6,000 lb Trailer...
    view full answer...
  • Replacement Slipper Spring Leaf Springs with 2 Inch Width and 27 Inch Length
    Slipper springs come in 1-3/4 inch, 2 inch, 2-1/2 inch and 3 inch widths. You most likely have a 2 inch spring. The number of leafs isn't the issue, but rather the weight capacity of the spring. We do have one spring that is 2 inches wide and 27 inches long and it is # e67SR which is for a 6,000 lb axle. For a different capacity, if you can tell me the measurement of "B" in the attached photo for your springs, and the capacity of your axle or total trailer weight capacity and number...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Leaf Spring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Manda E
Updated by:
Manda E
Employee Mike S
Written by:
Mike S
Employee Ryan G
Installed by:
Ryan G
Employee Andy C
Installed by:
Andy C
Employee Ethan H
Video by:
Ethan H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.