Trailer Hitch Recommendation for a 2012 Chevy Colordao

Question

Question:

What trailer hitch would you recommend for a 2012 Chevy Colorado W/T with the 2.9L motor.

asked by: Luis H

1

Helpful Expert Reply:

I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75607 hands down for your 2012 Chevy Colorado. I like this option over the Curt # 13252 because it has a hidden crosstube which not only looks better, but it also means you'll have better ground clearance.

Attached is an installation video as well as a photo showing what it will look like once installed.

Typically when a trailer hitch is installed on a pickup it will be used for towing. If this is what you're planning on doing and you don't already have everything that you need then I recommend installing the T-One # 118301 for basic trailer lighting and then adding the Wiring Kit # ETBC7 if you need a fully functioning 7-Way. Then for a ball mount kit I recommend checking out the B&W Tow & Stow # BWTS10037B because it is a high quality option (backed by a limited lifetime warranty) that can be used to tow a wide variety of trailers. Adding a single locking hitch pin like part # e98882 will secure this ball mount to your trailer hitch.

expert reply by: Jon G

1

Draw-Tite Trailer Hitch Installed on Chevy Colorado
(click to enlarge)

Answer 1

Yes, the Draw-Tite Class III hitch, part #75607 will fit all models of the 2007 Chevrolet Colorado, including the Xtreme models. I have included a link to the instructions so you can review them. I have also added a link to a video of the same…

view full answer...

Answer 2

The torque spec for the Curt Trailer Hitch Receiver part #C13143 which is a fit for a 2015 Lexus RX 350 can be found in the installation instructions attached below. It's subject to change but currently listed at 86 ft-lbs. If you need a…

view full answer...

Answer 3

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 4

For your 2014 Hyundai Tucson there are a few options for trailer hitches. I would go with the Draw Tite part #75717 as it has the highest capacities and best price but I can explain the differences too. The Curt hitches part #C13120 and #C13066 are…

view full answer...

Answer 5

I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7178 for your 2013 Toyota Prius. There is no drilling required to install this on your Prius and it gives you a 2" Receiver to utilize for your bike rack. While installing the hitch I…

view full answer...

Answer 6

I recommend installing the etrailer Trailer Hitch Receiver #e72AR on your 2022 Acura RDX. I personally own a 2020 RDX and we tried to install the new Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT89GR on it but there are no holes for it to…

view full answer...

Answer 7

Basically you want the tow bar to set as level as possible when flat towing. You have 3 inches up and down that is considered safe. Check out the picture I attached that shows what I mean. I also attached a help article that covers how to pick out…

view full answer...

Answer 8

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

view full answer...

Answer 9

For your 2019 Kia Sorento we only have 2 inch hitches available since it's a higher capacity vehicle like the Draw Tite part #75908. 2 inch hitches are generally preferred as they have higher towing capacities and more hitch accessories are made…

view full answer...

Answer 10

In the trailer world GTW stands for Gross Trailer Weight, and TW means tongue weight. Gross trailer weight is the entire weight of the trailer and tongue weight is the amount of vertical load that is on the coupler of the trailer. Basically how the…

view full answer...

Answer 11

The only difference between the Curt hitch for your 2016 Honda Odyssey part #C13068 and the etrailer #e98862 is the powdercoat finish. The Curt has a gloss black finish and the etrailer has a matte finish that is harder to damage. Aside from that…

view full answer...

Answer 12

When looking at weight capacities of a towing setup, you will always be limited by a system's weakest component. I took a look at the online owner's manual for your 2016 Chevrolet Traverse and saw that for a front-wheel drive model that does…

view full answer...

Trailer Hitch Recommendation for a 2012 Chevy Colordao

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching