Will Draw-Tite Hitch 75607 Fit a 2007 Chevrolet Colorado Xtreme

Question

Question:

Will this hitch fit a 2007 colorado Xtreme which has a body kit in it?

asked by: nigel

0

Expert Reply:

Yes, the Draw-Tite Class III hitch, part # 75607 will fit all models of the 2007 Chevrolet Colorado, including the Xtreme models. I have included a link to the instructions so you can review them. I have also added a link to a video of the same hitch being installed on a 2008 Colorado.

expert reply by: Patrick B

0

Answer 1

I spoke with Draw-Tite and they informed me that the Draw-Tite Max-Frame Trailer Hitch Receiver part #75607 can be used to replace the factory trailer hitch on a 2011 Chevrolet Colorado.

view full answer...

Answer 2

Yes, you will need replacement hardware kit #RHK. All you have to do is enter the hitch number and manufacturer where indicated on the #RHK page and our crack team of hardware goblins will assemble the correct parts. I have also a link to a video…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will Draw-Tite Hitch 75607 Fit a 2007 Chevrolet Colorado Xtreme

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching