SMI Air Force One Braking System Installation - 2019 Chevrolet Colorado Video

Thanks for the photo and good information! The Curt Spectrum Trailer Brake Controller #C51170 doesn't come with a universal pigtail but that can be acquired with part #C51515. Then all you need to do is match the following wires from the pigtail…

When flat towing a vehicle the front wheels have to be free to turn so that the vehicle can track behind the tow vehicle around corners. For more info on how to flat tow your vehicle check the owners manual of your vehicle.

We do have what you're looking for, but the charge line and tow bar wiring will be two (potentially 3) different parts. For your tow bar wiring I recommend using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 since the…

I spoke with Demco and their technician stated the easiest way to install your Demco Air Force One Supplemental Braking System w/ Wireless Coachlink - Air Brakes - Proportional Item #DM26VR is to cut the 90 degree angle fitting attached to your…

Yep! We have everything you need to get your 2021 Chevrolet Traverse on the road. First if you have Adaptive Cruise Control you will want to get the Blue Ox Baseplate #BX1738. If you do not have the Adaptive Cruise Control, you will need this…

According to Blue Ox, the Blue Ox Base Plate Kit #BLU33XR will work great with your 2022 Chevrolet Traverse, as long that your Traverse includes Adaptive Cruise Control & Top Shutters. With that being said, If you're interested in a complete…

If your 2022 Chevy Colorado ZR2 is four-wheel-drive with a N (Neutral) and a Four-Wheel Drive Low setting then it can be flat towed. To flat tow your Colorado you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety…

For your Brake Buddy, the power should come from your vehicle battery to prevent a loss of power to your braking system. However, if you utilize the 12V power at your 7-way and use the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25…

The Tow Ready Vehicle To Vehicle Taillight Converter, #118158, you have referenced will not be needed since you will be staying with a 3-wire system (separate stop and tail lights)on both of your vehicles. The converter is only needed if you had a…

That is exactly what converter #118158 was designed for. You will not have to use diodes, although you could if you wanted and it wouldn't hurt anything, because there is only one input circuit for each of the wires. The red output wire would go…

Yes if you were ever stuck you could use the base plate kit like part #DM9517335 as a recovery point.

When wiring in Tow Ready Vehicle to Vehicle Tail Light Converter #118158 the tow vehicle's combined stop/turn signals and ground do connect at the input side. The ground connection will be split at the input side to also allow it to be run over…