To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (61 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Directions were wrong on which bolt to remove and replace with new bolt. The metal spacer blocks were about 1/8 in to big, I had to use some washers. The metal blocks that the carriage bolts fit into that go inside the frame were too long, I had to cut them down about 1/4 in on both. The ends of the hitch are really bulky and show from side of truck. I actually had to cut my exhaust tip off to get the hitch into place. Wish I would have went with a different brand.
This hitch was easy to install. Great product as shown. Video on line showed exactly how to install. It shows to remove the two rear bumper bolts. But to get the two new front bolts installed, I also had to loosen the front bolt for the rear bumper. Other than that, this is my second hitch from etrailer and I would not hesitate to buy again.
Thanks.
I purchased a Curt hitch along with a harness for lights and turn signal for my 2011 Chevy Colorado. Everything was a perfect fit with installation time of 45 minutes or so. I would definitely recommend this product.
The installation was simple and fast. I review the video that was provided, then just followed it. Putting the extra bolt through the frame and using the provided spacer and fish wire made the installation easy. I got some help from a neighbor to hold one end while I bolted up one end and then finished off the other side. The video made this installation very easy and quick. I took me about an hour (that included getting a neighbor to help).
Hitch arrived as stated, and in perfect condition. I installed hitches for U-Haul Hitch World years ago, and know a good product. I always recommend Curt products. (or Draw-tite if Curt not available.
Installation was very difficult, probably because I was installing a new hitch on an 18 year old truck. The only problem I encountered that could be remotely attributed to the hitch was that the supplied shims did not fit and I had to improvise to make up the clearance between the hitch and the frame.
so easy to install
Having worked at UPS for 30 years, I knew what to expect of my hitch delivery. I wasn't disappointed. The only thing that wasn't scratched was the etrailer.com sticker. That got UPS off the hook, scratches were obviously there prior to being put on the Feeder trailer.
I wiped off all the dust (etrailer.com sticker was barely sticking due to dust) and gave it a fresh coat of Rust-oleum. Looking good now.
With all that being said, great website, took longer than expected to ship the 6 items. UPS did an outstanding job with what they were given. A dirty, scratched hitch flopping around in an oversized cardboard box??? Really? Attention to details gets repeat customers.
Solid, outstanding-the only negative was fishing the bolt through the frame. SUGGESTION: try a few times, don’t get frustrated, take breaks and come back if you are unsuccessful at first. Just purchased 4-bike rack too! Outstanding customer service and great videos!!! This is my go to company for anything like this!
I had the install from hell because of being a novice and a bolt already on the truck was cross-threaded, didn't know this but it was hell to get out. After learning what taps even are and tapping the bolt hole everying is fine. I was doing the fishwire really wrong so i'd recommend anyone lookup videos of this and then it shouldn't be too hard.
I think the hitch is good though.
Quality is there, however on my 2009 truck I had to deviate from the instructions because the carriage bolts would not fit through the access holes so I had to remove the bumper to fish them through. I also had to use two of the original bolts on the bottom as the bumper actually had a welded barrel nut where the carriage bolt should have gone. Overall took about 30 mins because of the faffing. The harness that goes with this took another 5 mins. The hitch looks pretty bullet proof once fitted.
The hitch fit perfectly and the light kit harness is a 5 minute install. The drawbar is longer than normal which I like alot. A no Brainer, great products.
The hitch is amazing. However, the packaging was shoddy and the hitch was simply placed in a box with no additional protection. The hitch arrived very quickly after placing the order, however, part of the hitch was sticking through the box when it arrived and had several scratches from transit. All of that aside, make sure you watch a few [online] video tutorials, especially when it comes to the fishwire portion of the install. I was able to the get the carriage bolt into the access port without enlarging the hole by placing the bolt backwards into the access slot and tapping it in with a mallet. When the install was completed, it looked very clean and definitely feels sturdy.
Everything went smoothly!
Looks and fits great. Installation was easy enough, that this 61year old man could install it without help.
Ron P.
4/23/2014
Works great. Save yourself some money, install it yourself.
Instructions & installation on my Chevy Colorado was painless. I have always used Reese hitches in years past & had to pay the extra cost of installation - I did it myself & am very satisfied!
the six bolt locations matched the 2011 chevy colorado very well. two of the vertical bolt locations did not need the supplied bolt/lug/nut. at these two locations chevy has a welded in barrel nut, so i reused the OEM bolt when installing the hitch.
Installing this trailer hitch was simple, and pretty easy. The installation video helped immensely!
I highly recommend doing business with etrailer, I ordered this product on a Thursday, received it the following Monday, even on a holiday weekend. like I said shipping was fast, and customer service was top notch, great job!
on my 2012 gmc canyon the bolts supplied to drop through the frame would not go through the hole in the frame of the end of the frame they had to be ground off on two sides to go threw otherwise the installation went well
Quick delivery and complete. The installation was simple and easy for one person to do. Would recommend to others looking for an American made product.
The product wasnt to bad to install on your own, the holes liked about 5/8 of an inch to lining up so I had to do some pulling but I got it, it looks really good I'd recommend it.
Initial perspective - good Construction. High strength gauge steel. I had some concern with the hardware when I noticed the box was broken in two areas,but, since all of it was securely tape down to the hitch it was all there. Still pending to install it.
Great fitment, included directions easy install, fast shipping from the good guys at e trailer, another satisfied customer
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
12/5/2022
I recommend watching the video installation that we have on a 2004 GMC Canyon. We do not recommend modifying the hardware that comes with the hitch.
Helpful Links
tv-install-trailer-hitch-2004-gmc-canyon-13252.aspx