Diameter of Bottom of Timbren TTRA1702 Aeon Springs

Question

Question:

What is the dimension or diameter of the ttra1702 where it touches the axle? Need to know this to see if it will fit between the u- bolts.

asked by: Martin S

0

Expert Reply:

The bottom portion of the Timbren # TTRA1702 Aeon spring that would contact the axle beam measures 2-3/8 inches in diameter, according to my contact at Timbren.

I've linked to a product description video featuring the # TTRA1702 Timbren Aeon springs.

expert reply by: Mike L

0

Answer 1

Unfortunately Timbren does not make their Timbren Active Off-Road Bumpstops #TABSOSR kit without the axle bracket, so if you don't need it you'll just ignore it and install everything else. To figure out if you need a spacer kit #T68MR…

view full answer...

Answer 2

For your 2018 Chevy Colorado ZR2 Diesel I recommend RoadActive Suspension #RAS4617. This system will provide extra support when towing and/or carrying loads in the truck bed as well as help with overall stability all without affecting the unloaded…

view full answer...

Answer 3

For your 2015 Nissan Frontier I would recommend the SumoSprings Solo Custom Helper Springs #SSR-610-40, which are the blue SumoSprings. Although SumoSprings are pretty good about not affecting your unloaded ride quality you're right, the others…

view full answer...

Answer 4

The Timbren Trailer Suspension Enhancement System for Underslung Axles #T92MR is 5-1/4" tall. Timbren recommends The spring be in constant contact with the frame at all times. So ideally you will want exactly 5-1/4" from your axle tube to…

view full answer...

Answer 5

The total height of the Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2011 Nissan Frontier is 4-5/8". If you want to add spacers you'll use the Timbren Spacer part #TA25722-90P00 and or part #A25723-90AH00. In regards…

view full answer...

Answer 6

As the max working load of your 48" x 96" Harbor Freight Haul Master utility trailer is 1,720 pounds, the Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs #TTRA1702 will have no issue working with it. However,…

view full answer...

Answer 7

The Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs #TTRA1702 will be a great help in reducing body roll and helping dampen the bounce. Based on your measurements this will immediately take on load and stabilizing while…

view full answer...

Answer 8

The easiest way to determine if your 1998 Ford Explorer has the factory air leveling system (automatic ride control) is to call a Ford dealer and have them look up the VIN in their computer system to see how that vehicle was equipped. If the system…

view full answer...

Answer 9

Drop axles don't drop the distance between the trailer frame and axle as basically the drop is after the suspension and between the spindle. So the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket #TSS-106-40 would install just fine…

view full answer...

Answer 10

Based on what you are saying and your photos, it apprears you have springs that are double eye springs. The springs will need to be based on the load of your trailer. The axle capacity may be difficult to know as you said it appears to be custom. I…

view full answer...

Answer 11

The instructions for the SumoSprings kit part #TSS-106-40 do not specify whether they should install in front of or behind the rear axle but I would recommend in front of the axle since most shock is going to be first on the front portion of the axle…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...