Trailer Wiring Harnesses for a 2013 Dodge Journey

Question

Question:

Does Wiring Harnass # C56109 work on my 2013 Dodge Journey . I have installed a Cut Trailer Hitch.

asked by: Roger N

0

Expert Reply:

The 2013 Dodge Journey is available with LED tail lights or regular incandescent tail lights. If your Journey has incandescent lights then you can use Curt trailer wiring harness # C56109.

If your Journey has LED lights then you would need to use # C56330. I have included links to the installation instructions for both wiring harnesses for you.

expert reply by: Michael H

0

Answer 1

The etrailer Trailer Hitch Receiver item #e98845 does not come with a wiring harness. This is a custom fit 2" hitch receiver for a 2013 Dodge Journey. The wiring harness you will need is determined by what kind of tail lights your Journey has.…

view full answer...

Answer 2

When it comes to installing a trailer wiring harness on your 2017 Dodge Journey there are two options you can choose from: With Incandescent Bulb Taillights With LED Taillights The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer…

view full answer...

Answer 3

For your 2017 Dodge Journey we can certainly help you pick out the correct hitch and wiring. For a hitch you'd want to start with the Curt hitch part #C13201 which is a confirmed fit and will work well. This hitch has the best capacities and…

view full answer...

Answer 4

Did the dealer say it didn't need to be reprogrammed or that your 2011 Lexus RX 350 doesn't have the factory tow package? Because if it does not have the factory tow package then you would need to install a different wiring harness, #118478.…

view full answer...

Answer 5

Part #56083 is called a T-connector because it connects into wires that run between the tail-lights. The connection point on the vehicle will only work if your 2010 Lexus RX350 came with the factory tow-package.

view full answer...

Answer 6

First, the trailer wiring harness #56083 is only a fit if your 2015 Lexus RX 350 came with the factory tow package. If it did not then that could be why it isn't working. Or, if it does have the factory tow package, it could be a missing fuse or…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...