How to Install T-Connector on 2010 Lexus RX350

Question

Question:

from the picture It doesnt look like a T but an inline plug. Is there a pdf instruction for this so I can see where it plugs into? Thanks

asked by: Chester F

0

Expert Reply:

Part # 56083 is called a T-connector because it connects into wires that run between the tail-lights. The connection point on the vehicle will only work if your 2010 Lexus RX350 came with the factory tow-package.

expert reply by: Patrick B

0

Answer 1

Curt trailer wiring harness #56083 is designed to fit a 2013 Lexus RX 350 that came with the factory tow package. The dealer is likely correct, additional parts could possibly be needed to activate the tow package wiring. You could try to place a…

view full answer...

Answer 2

Yes, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Connector, part #56083, comes with installation instructions for your 2010 Lexus RX350. This wiring harness simply plugs into the factory connectors on your Lexus.

view full answer...

Answer 3

I'm assuming you have a 2013 Lexus RX350. Did the #56083 wiring harness ever work, or did it work for awhile and then stop? From my research, the connector should work once plugged into the factory towing connector under the vehicle, unless your…

view full answer...

Answer 4

To install the Tow Ready T-One Vehicle Wiring Harness 4-pole #118255 on a your 2012 Lexus RX 450H, the white plug that has a small black box attached to it plugs in to the vehicle wiring harness. This attachment point is located in the rear cargo…

view full answer...

Answer 5

First, the trailer wiring harness #56083 is only a fit if your 2015 Lexus RX 350 came with the factory tow package. If it did not then that could be why it isn't working. Or, if it does have the factory tow package, it could be a missing fuse or…

view full answer...

Answer 6

For your 2017 Dodge Journey we can certainly help you pick out the correct hitch and wiring. For a hitch you'd want to start with the Curt hitch part #C13201 which is a confirmed fit and will work well. This hitch has the best capacities and…

view full answer...

Answer 7

When it comes to installing a trailer wiring harness on your 2017 Dodge Journey there are two options you can choose from: With Incandescent Bulb Taillights With LED Taillights The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer…

view full answer...

Answer 8

The 2013 Dodge Journey is available with LED tail lights or regular incandescent tail lights. If your Journey has incandescent lights then you can use Curt trailer wiring harness #C56109. If your Journey has LED lights then you would need to use…

view full answer...

Answer 9

The Curt trailer wiring harness part #C56330 will work great with LED trailer lighting. The other one you mentioned does not work with LED taillights.

view full answer...

Answer 10

The etrailer Trailer Hitch Receiver item #e98845 does not come with a wiring harness. This is a custom fit 2" hitch receiver for a 2013 Dodge Journey. The wiring harness you will need is determined by what kind of tail lights your Journey has.…

view full answer...

Answer 11

The Curt T-Connector vehicle wiring harness #C56109 does not require a powered converter because it is designed for vehicles that have incandescent lights. Traditional incandescent bulbs draw much more power than modern LED lights, so they can handle…

view full answer...

Answer 12

I actually own a 2015 Chevy PPV so I can help with some insight into the hitch fit of the C13161. So the hitch does fit both the PPV and the Tahoe but the reason you might see that it's only listed for the PPV is because the PPV models don't…

view full answer...

How to Install T-Connector on 2010 Lexus RX350

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching