Tongue Extender for Rack n Roll Trailer

Question

Question:

I see you have the replacement tongue do you have a tongue extension so I can carry my 18 foot kayak?

asked by: Leslie M

0

Expert Reply:

Yes, we do have the tongue extender. The Tongue Extension Kit for Yakima Rack and Roll Trailer # Y08109 is the correct tongue extender for the Rack n Roll Trailer and will allow you to carry a single 22' boat or two 21' boats.

expert reply by: Scott S

0

Answer 1

I called Yakima and they gave me the dimensions of the two ends on the Yakima Tongue Extension Kit #Y08109. The end of the extension that slides out of the extension and into the trailer tongue has an outside dimension of 1-1/2 inches. The other end…

view full answer...

Answer 2

If you use the Tongue Extension Kit #Y08109 along with your Rack and Roll Trailer #Y08107 then you will be able to transport your two 18-foot kayaks provided their combined weight does not exceed the trailer's limit of 250-lbs. If you need to add…

view full answer...

Answer 3

I love the Yakima Rack and Roll, part #Y08107, but the trailer isn't designed for in-water use, as none of the electrical components are waterproof or water resistant. I do, however, have an alternate solution. The Rack and Roll is aluminum…

view full answer...

Answer 4

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

view full answer...

Answer 5

We have the replacement 2" x 2" Rack and Roll Tongue #8880204 but if you're needing that inner piece on the Tongue Extension Kit #Y08109 then that's only available with the extension kit so you'll need the whole part number.

view full answer...

Answer 6

Unfortunately, Fulton doesn't offer a a folding coupler hinge kit for a 2 x 2 inch trailer tongue. I have heard from some of our customers that they've used a couple of pieces of 1/2 inch steel plate plate cut to the appropriate size to shim…

view full answer...

Answer 7

Since we have started carrying the Yakima Rack and Roll trailer #Y08107 I have not heard any complaints regarding the wheel bearings failing and only a few instances where people wanted to replace the wheel assembly. If you need to replace your…

view full answer...

Answer 8

From the ground to the top of the crossbars when the the Yakima Rack and Roll Trailer, #Y08106, is level, it measures 22 inches. The Heavy Duty Shocks, #Y08110, is using the terms shocks as an all encompassing term that covers the shock itself and…

view full answer...

Answer 9

I checked the install instructions for the Yakima Rack and Roll Trailer part #Y08107 that you referenced and found the following torque figures: Wheel axle nuts (2) – torque to 57 ft. lbs. (77N-m) (a force of 57 lbs. on a 1 ft. lever.) Swingarm nuts…

view full answer...

Answer 10

I do recommend adding the Tongue Extension Kit for Yakima Rack and Roll Trailer #Y08109 when carrying boats over 16 feet long with a Yakima Rack N Roll Trailer #Y08107 since it will prevent the boats from contacting the back of your vehicle while…

view full answer...

Answer 11

You could probably make one with a fold away hinge but CE Smith does not offer a hitch extender for the CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks #CE48810. Yakima makes tongue extenders for their Rack and Roll trailer #Y08106 with the…

view full answer...

Answer 12

Yes, the Tongue Extension Kit for Yakima Rack and Roll Trailer #Y08109 will work with either the Yakima Rack and Roll Trailer - 78" #Y08107 or the Yakima Rack and Roll Trailer - 66" #Y08106. The Tongue Extension Kit for Yakima Rack and Roll…

view full answer...

Tongue Extender for Rack n Roll Trailer

Product Page this Question was Asked From

Continue Researching