Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
Question:
Hi. I have a 2007 ranger boat trailer with cool bath hubs. The trailer is a tandem axle. I need the front spindle and hub without the brake calipers. Could you give me the part number for a hub and spindle? It doesn’t matter to me if they are grease or oil hubs. Thank you.
asked by: Brandon
Helpful Expert Reply:
The 11033L hub shown in your photo was manufactured by Tie Down Engineering, or TDE. What you have there is a hub for a standard 3500 lb axle which has a 5 on 4-1/2 inch bolt pattern. For an idler hub, I'd recommend the galvanized # AKIHUB-545-35-G-K. The hub includes the bearings, races, grease seal, dust cover and lug nuts. These are grease hubs.
The spindle you need will depend on the diameter of the axle tube, which I have no way of looking up, but if you use the provided link, you can see the spindles we offer that would be compatible with the # AKIHUB-545-35-G-K idler hub.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Is There a Replacement Controller For Power Gear Controller #140-1224 REV 0G?
- Shop: Fifth Wheel Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: 8~214~8
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Aluminum Sendel Series T07 Black Machined Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2
- Search Results: akebrk~7~sa
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: 57020
- Q&A: Replacement Hubs for TDE 11033 on 2005 Ranger Boat Trailer
- Search Results: 118255
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Search Results: 8~401~5
- Search Results: aluminum trailer wheels
- Search Results: am25dr
- Video: Review of Fantastic Vent Replacement Off White 17 rpm Lift Motor B Series Roof Vents - FVK6010-80
- Shop: Vehicle Tow Bar Brake System
- Shop: Base Plate for Tow Bar
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Replacement Trailer Hub Ranger Trail
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack - FXP10W0301
- Article: Most Popular Wheel Bearings
- Shop: Gooseneck Hitch
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Q&A: Replacement Hub Assembly for T.D.E. 11033