Replacement Hub for Tie Down Engineering 11033
Question:
Same issue as the other thread on here about the tie down engineering boat trailer hub. I need to know which hubs are direct replacements and which are the proper bearings. TDE #11033.
asked by: Jose
Expert Reply:
I believe we can narrow this down based on the information you are referencing. However, the best way to be sure is to measure your existing bearings or spindle with a digital caliper like the # PTW80157.
It looks like one bearing is stamped with # L44649. The other bearing measurement taken was 1.40" which tells me they probably used a tape measure. The closest thing, and what would make the most sense, is that it was actually 1.378" and a # L68149 bearing.
This bearing combination, along with the # RG06-050 grease seal, indicate this is a 3,500 lb axle and hub assembly. For a replacement hub you can use the # AKIHUB-545-35-EZ-K. This comes pre-greased and has the same 5 on 4-1/2 bolt pattern.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Search Results: 5/8 inch hitch pin
- Search Results: 84 spindles
- Search Results: akihub~545~35~g~ez~k
- Q&A: Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Search Results: castle nut washer
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Search Results: akihub~545~35~pg~k
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: Will Trailer Hub # AKIHUB-545-35-K Fit in Place of TDE Hub 11033
- Shop: Transmission Cooler
- Shop: Vehicle Cargo Control
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Search Results: clevis pin
- Search Results: akihub~545~35~ez~k
- Video: Review of etrailer Trailer Fenders - Tandem Axle Steel Fender - HP44VR
- Video: Kodiak Trailer Bearings Races Seals Caps - Caps - XLPROLUBE1980 Review
- Q&A: 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
- Q&A: Do Trailer Wheel Bearings Need Repacking if Bearing Buddy Bearing Protectors Are Used
- Q&A: Replacement Hubs for TDE 11033 on 2005 Ranger Boat Trailer