Do Trailer Wheel Bearings Need Repacking if Bearing Buddy Bearing Protectors Are Used

Question

Question:

When i install bearing buddies, do i need to first remove and repack the bearings or can i just install them then grease them via the zerk and go on with my life?

asked by: Jeremy P

0

Expert Reply:

Technically speaking, once the bearings are initially packed, you shouldn't need to repack them. I'd still recommend breaking the hub down occasionally to inspect the bearings and races to make sure everything's in good condition.

expert reply by: Mike L

0

Answer 1

When you use the Bearing Buddy Bearing Protectors like #BB2441, so you do not need to take apart the wheel hub and repack the bearings. The Bearing Buddy Protectors have a spring loaded seal that keeps the moisture and debris out of the bearings.…

view full answer...

Answer 2

There is no need to further re-pack the bearings with the Bearing Buddies like the Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair) #BB2441. So long as you maintain the grease levels, repacking the bearings isn't…

view full answer...

Answer 3

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 4

The Bearing Buddy Bearing Protectors #BB2441 provide premium protection for your wheel bearings. It is still recommended that you inspect the bearings, races, and seals every 12 months or 12,000 miles to ensure reliable performance on your trailer.…

view full answer...

Answer 5

When repacking your bearings, you do not want to have the whole hub filled with grease. You basically just want to get the inner and outer bearings and their races greased up and moving smoothly. I attached a video of the process that should help you…

view full answer...

Answer 6

Bearing Buddies are a great way to keep grease in a trailer hub. I recommend them as long as you are aware that it's very easy to put too much grease in a hub with these which will blow out the seal. They have no problem being used on longer road…

view full answer...

Answer 7

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 8

The Optronics light that you referenced, part #ST70RB, is an exact replacement for Bargman light #40-06-001. If you can find that part number on your Bargman light, then we can be sure that this light is the correct replacement. Even if your Bargman…

view full answer...

Answer 9

Bearing Buddy pumps grease into the center of the hub all the way back to the grease seal. A double lip seal should be used to prevent grease from blowing out the seal when added. When the hub and seals and bearings are first assembled, they should…

view full answer...

Answer 10

Are you using double lip grease seals or single lip seals? Is there a metal spring that runs around the seal to hold it tight to the spindle? I'd verify that first but if it's not that it's either a bad spindle or you are using the wrong…

view full answer...

Answer 11

I don't have any reference material that would tell me which hubs and bearings your 1978 Highlander boat trailer would use. All's not lost, though. If you can supply the proper information, I'd be happy to check the hubs we offer and see…

view full answer...

Answer 12

I believe we can narrow this down based on the information you are referencing. However, the best way to be sure is to measure your existing bearings or spindle with a digital caliper like the #PTW80157. It looks like one bearing is stamped with…

view full answer...

Do Trailer Wheel Bearings Need Repacking if Bearing Buddy Bearing Protectors Are Used

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching