Replacement Hubs for TDE 11033 on 2005 Ranger Boat Trailer
Question:
I have a 2005 ranger boat trailer. I would like to replace the hub and the previous hub is model number TDE 11033L. What is my best option to replace that product? Thank you
asked by: Nathan
Expert Reply:
According to my research, your trailer will have a 3500 lb axle on it. The replacement for your TDE 11033 hubs should be # AKIHUB-545-35-G-EZ-K, which use an L68149 inner and an L44649 outer wheel bearing along with a 58846 grease seal that has a 2.565 OD and an ID of 1.719. The hub has a 5-on-4-1/2 inch bolt pattern.
You'll want to check the bearings your existing hub uses, along with the diameter of the inside hub bore and the surface of the spindle where the grease seal rides to ensure the bearing sets and seal dimensions for the part mentioned above are compatible because sometimes boat trailer manufacturers will make some oddball proprietary stuff, so you're stuck getting it from the manufacturer.
If the above specs don't match up, if you could reply with the inner/outer bearing and the OD of the hub bore and the diameter of the spindle where the grease seal rides, as well as the hub wheel bolt pattern, I'd be happy to look into it further for you.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Shop: Trailer Hitch
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Search Results: 44649
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Search Results: fold down step
- Search Results: 48548
- Shop: Replacement Trailer Hub Bearing - L68149
- Search Results: ratchet straps
- Search Results: retractable ratchet strap
- Search Results: 68111
- Search Results: spare tire mount
- Shop: U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: CargoBuckle G3 Retractable Ratchet Straps w/ Angled Brackets - 2" x 6' - 1,167 lbs - Qty 2
- Shop: Fifth Wheel Hitch
- Shop: BOLT brand vehicle and hitch locks
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Do Trailer Wheel Bearings Need Repacking if Bearing Buddy Bearing Protectors Are Used
- Q&A: Information Needed to Determine Replacement Hubs for Older Highlander Boat Trailer
- Q&A: Do Bearing Buddies Work Well on Travel Trailer Hubs
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Redline Trailer Bearings Races Seals Caps - Caps - RG04-250 Review
- Video: Kodiak XL ProLube Oil Bath Hub Body and Cap Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review