Ground Clearance for Draw Tite Hitch 76021 when Installed on 2017 Jeep Renegade

Question

Question:

What is the ground clearance of the Curt 76021 on a 2017 Jeep Renegade? I have a 2017 Jeep Renegade. Ill be using it to pull a small 14foot boat trailer.

asked by: Karin

0

Expert Reply:

When we had the chance to install the Draw Tite hitch part # 76021 on a 2017 Jeep Renegade like yours we found that the ground clearance ended up being right at 9-1/2 inches.

expert reply by: Jameson C

0

Answer 1

The best trailer hitch receiver for your 2018 Jeep Renegade Trailhawk is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76021. The distance from the ground to the bottom of the receiver tube will be around 9-3/4" and will be the most we…

view full answer...

Answer 2

The install video you referenced (that I attached a link to) had an older version of the Draw Tite hitch part #76021 installed on it. The install of the current version of this hitch would be the exact same. I attached a picture that I think will be…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Ground Clearance for Draw Tite Hitch 76021 when Installed on 2017 Jeep Renegade

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching