Will Curt 4-Way Harness For 2017 Honda Accord Touring Allow Trailer to Use Incandescent Lights

Question

Question:

Wire harness for 2017 Honda Accord Touring. Will the wiring harness with power lead to the battery enable me to plug into incandescent trailer bulbs although car has LED stop and turn signals?

asked by: Ed W

0

Expert Reply:

Yes, your trailer with incandescent lights will be able to plug into the Curt wiring harness for your 2017 Honda Accord Touring sedan with LED lights without any issue; the correct fit is the following:

- Curt T-Connector Vehicle Wiring Harness # C56299

Since you are going to be doing some towing with your '17 Accord Touring, you will also need a hitch if you don't have one, and I verified with Curt the correct fit for your vehicle is the Curt Trailer Hitch Receiver # C11681.

The other things you will need with this hitch and wiring for your Accord to complete your towing set up are the Curt Class II Drawbar # C45521, Pin and Clip # F-4, and depending on the size of your trailer's coupler, either 2" Hitch Ball # C40018 or 1-7/8" Hitch Ball # C40001.

expert reply by: Kyle S

0

Answer 1

Not only is the size of the trailer hitch receiver important, but also the class is important. The Yakima Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches #Y02445 is only to be used on class 2 receivers so it will not work on your class…

view full answer...

Answer 2

I have reached out the the manufacturer about your specific question on the Swagman XTC2 #S64670. I have found that due to the weight rating on class 1 hitches and the common combined weight of the rack and bikes loaded, our racks are not…

view full answer...

Answer 3

The problem is that the hitch you have is a Class I hitch, probably made by Reese, Draw-Tite, or Hidden Hitch. Those hitches have a stop punched into the shank to prevent the use of Class II accessories from being used. It is meant to prevent…

view full answer...

Answer 4

Out of the available trailer hitches for your 2015 Honda Accord I recommend going with the Curt Trailer Hitch Receiver #C11681 over the Curt item #C11496. They are both identical in Class and weight ratings and come with a 1-1/4" receiver.…

view full answer...

Answer 5

The hitch receivers available for your 2015 Honda Accord are all Class I with a 1-1/4 inch receiver opening like the Custom Fit Curt Hitch, #C11681. Curt does require the use of Support Straps, #18050, for all non-trailer loads including bike…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...