Trailer Hitch Installation - 2015 Honda Accord - Curt Video

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

For your 2020 Jeep Compass I recommend the Curt Trailer Hitch Receiver #C13363. It's rated at 600 lbs of tongue weight, and 4,000 lbs of gross trailer weight. However I looked up the owner's manual for your Compass, and it is rated for a…

To install a hitch like the Curt Hitch part #C11681 that you referenced on your 2015 Honda Accord you will need to trim the heat shield. For more info on that check out the install video and installation instructions I attached.

Curt requires a stabilization strap for all Class I hitch mounted accessories to relieve stress that is put upon the hitch while carrying hitch mounted accessories. To utilize the Curt Support Strap #18050 on your Swagman XTC-2 simply loop the strap…

The Curt Trailer Hitch Receivers like part #C11681 which is a fit for a 2013 Honda Accord are designed so that anyone can install it. It requires almost no prior mechanical knowledge nor do you really need any special tools in most cases. The…

Per manufacturer's guidelines, the towing capacity of your 2015 Honda Accord EX-L with one passenger in the vehicle is rated at 1,000 lbs. whereas the Curt Class I Trailer Hitch is rated for a maximum 2,000 lbs. of gross trailer weight (GTW) and…

I have reached out the the manufacturer about your specific question on the Swagman XTC2 #S64670. I have found that due to the weight rating on class 1 hitches and the common combined weight of the rack and bikes loaded, our racks are not appropriate…

The hitch receivers available for your 2015 Honda Accord are all Class I with a 1-1/4 inch receiver opening like the Custom Fit Curt Hitch, #C11681. Curt does require the use of Support Straps, #18050, for all non-trailer loads including bike racks,…

The problem is that the hitch you have is a Class I hitch, probably made by Reese, Draw-Tite, or Hidden Hitch. Those hitches have a stop punched into the shank to prevent the use of Class II accessories from being used. It is meant to prevent someone…

Yes, your trailer with incandescent lights will be able to plug into the Curt wiring harness for your 2017 Honda Accord Touring sedan with LED lights without any issue; the correct fit is the following: - Curt T-Connector Vehicle Wiring Harness…

Not only is the size of the trailer hitch receiver important, but also the class is important. The Yakima Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches #Y02445 is only to be used on class 2 receivers so it will not work on your class 1…

Out of the available trailer hitches for your 2015 Honda Accord I recommend going with the Curt Trailer Hitch Receiver #C11681 over the Curt item #C11496. They are both identical in Class and weight ratings and come with a 1-1/4" receiver.…