Will the Draw-Tite 3594 Get Me Close to 16 of Rise if My Hitch is 11 1/2 Off the Ground?
Question:
Hello! We recently bought a new 2020 Chevy Bolt EV and had a hitch with a 4-pin flat connector installed on it. We are purchasing a Let Trailer which is described as needing a 1-7/8? ball hitch and hitch height needs to be set 16?, with +-1? of tolerance. As you can see in the attached photo, the top of the opening of our hitch sits at 11.5inch off the ground. Since there is no adjustable height mount available for the 1.25inch hitch, I am hoping that your product number 3594 Draw-Tite Drawbar for 1-1/4 Hitches - 4inch Rise - 10inch Long - 2,000 lbs plus product #19256 1-7/8inch Hitch Ball - 3/4inch Diameter x 1-9/16inch Long Shank - Chrome - 2,000 lbs will bring our hitch height to 15.5, which is within the 16inch plus or minus 1. Am I understanding this correctly? Thanks.
asked by: Jess Z
Expert Reply:
From the measurement you provided, the Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs # 3594 will definitely get you as close to level as possible. The Draw-Tite 1-7/8" Hitch Ball # 19256 would then complete the set up.
(click to enlarge)
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1
- Q&A: Recommended Hub Covers for a 5 on 5 and 5 on 4 1/2 Bolt Pattern
- Video: etrailer Single Axle Trailer Fender with Backing Plate Installation
- Video: LubriMatic Wheel Bearing Grease Review
- Article: Trailer Hitch Receiver Sizes
- Q&A: How Much Grease Should I Buy To Pack Wheel Bearings
- Video: Optronics LED Combination Trailer Tail Light Kit Review
- Search Results: hub cap
- Shop: Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Shop: Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Q&A: My Axle Has No Cotter Pin Hole Can I Install Bearing Kit for #84 Spindle?
- Search Results: spare tire carrier
- Q&A: Proper Mounting Location for Side Marker Lights on a Trailer
- Shop: Phoenix USA QuickTrim Hub Cover for Trailer Wheels - 5 on 4-1/2 - ABS Plastic - Black - Qty 1
- Video: Lippert Offset Cable Spare Tire Winch Review
- Search Results: anti rattle ball mount
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Video: Curt Hitch Locks - Standard Pin Lock - C23517 Review
- Video: Curt Ball Mounts - Fixed Ball Mount - C45025 Review
- Shop: Trailer Hitch
- Search Results: hitch pin
- Shop: Trailer Wiring
- Search Results: 36065
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
on Trailer Hitch Ball Mount
