Trailer Hitch Receiver For 2023 Hyundai Elantra Hybrid

Question

Question:

Why does it not fit the hybrid model?

asked by: Roy

0

Expert Reply:

The underside of the standard 2023 Hyundai Elantra is different than the hybrid model of the 2023 Hyundai Elantra Hybrid, which is why the # DT75MR won't fit. There is a hitch designed specifically for the hybrid which has different attachment points, and for that you need the following:

- Draw-Tite Sportframe Trailer Hitch Receiver # DT26PR

expert reply by: Kyle S

0

Answer 1

Yes, we do. For your 2023 Hyundai Elantra sedan, I recommend the Curt Trailer Hitch item #C53NR. This hitch is confirmed to fit all models of the 2023 Elantra except for the N and N-Line trims. The Curt Trailer Hitch item #C53NR is custom fit and…

view full answer...

Answer 2

I do have an image showing the Draw-Tite Trailer Hitch Receiver #DT75MR mounted below the red reflector on a Hyundai Elantra. I hope this helps you understand where the receiver will sit on your 2022 Hyundai Elantra N as we do not have the…

view full answer...

Answer 3

The Curt Trailer Hitch item #C53NR requires both drilling and cutting to install on your 2023 Hyundai Elantra. I have taken some screenshots from the instructions and attached them below to show you these steps. I have also attached a picture that…

view full answer...

Answer 4

According to Draw-Tite, their 24999 Class I hitch which we sell as part #DT75MR is a fit for all 2021 Hyundai Elantra models except for the N Line model. Draw-Tite mentions in step #5 of the installation instructions that the rear fascia will need to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Trailer Hitch Receiver For 2023 Hyundai Elantra Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching