Best Hitch for 2016 Subaru Outback for Trailer and Bike Rack

Question

Question:

I want to get a hitch for my 2016 Subaru Outback 2.5i. I plan to use the hitch for mounting a bike rack. I initially odored the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 - ITEM # 36493inch but now I am wondering if the version with 2inch opening would give me more versatility. I also am wondering if the Curt hitches have better ground clearance. I use my car on dirt roads that frequently test the clearance of my Subaru. Thank you.

asked by: Tracee M

0

Expert Reply:

For your 2016 Subaru Outback I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76227. This style of hitch is going to provide the cleanest look because the cross bar sits behind the bumper which also allows for a bit more ground clearance than the hitches that sit under the bumper. This hitch provides about 1/4" more ground clearance than the Curt Trailer Hitch Receiver # C13410 of similar style. I recommend going with the 2" hitch whenever possible because it is the most common hitch receiver size and will provide you with the most versatility in both weight capacity and what accessories will work with the hitch.

If you do not already have a bike rack for your hitch I recommend the Thule T2 Pro XTR Bike Rack for 2 Bikes # TH83JV.

expert reply by: Scott S

0

Answer 1

I believe you are referring to the 3 concealed cross tube hitches available for the 2019 Subaru Outback Wagon, Draw-Tite Class III part #76227, Curt Class III part #C13410 and EcoHitch part #306-X7601. The Draw-Tite part #76227 hitch is the best…

view full answer...

Answer 2

Installing a trailer hitch like the Curt Class II Trailer Hitch Receiver #C12136 on your 2016 Subaru Outback can effect your vehicle's ground clearance at the rear. The cross tube of the trailer hitch will sit below the vehicle, as seen in the…

view full answer...

Answer 3

Of the hitches that fit your 2018 Subaru Outback that you mentioned none of them would put more stress on the frame of the vehicle than the other. The Curt you mentioned part #C13410 is a really great option that I would recommend highly. I attached…

view full answer...

Answer 4

The recommended hitch really depends on which model T2 you have. For the TH9044 Thule T2 for 2" hitches you will need a 2" hitch receiver. In that case I recommend the etrailer.com Trailer Hitch Receiver #e98847. I like this hitch because…

view full answer...

Answer 5

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 which is a fit for a 2010-2019 Subaru Outback will install via eight total 10mm nuts which are actually reused as they are the factory fasteners for the bumper beam. The most up to date…

view full answer...

Answer 6

Minus packaging, the Draw-Tite #75673 Class III trailer hitch weighs about 32 lbs, and is a confirmed fit for your 2013 Subaru Outback Wagon. You might consider the less expensive Curt #C13410 Class IIl as well. The Curt hitch features a concealed…

view full answer...

Answer 7

For your 2018 Subaru Outback Wagon the Draw Tite hitch part #76227 is superior over all of the other hitches available. It has a 2 inch opening which is the most popular hitch size (more accessories are made to fit it), and has higher capacities at…

view full answer...

Answer 8

For your 2011 Subaru Outback Wagon the best hitch for ground clearance is the Curt #C13410 which fits very tightly to the rear bumper of the vehicle but also doesn't have a crosstube that hangs below the bumper either which helps with ground…

view full answer...

Answer 9

You are correct that all of the trailer hitches that we currently offer for your 2016 Subaru Outback will require drilling to install the hitch. The Draw-Tite trailer hitches require that an access hole be drilled in order to fishwire the…

view full answer...

Answer 10

I recommend the Draw-Tite 2 inch hitch for the 2016 Subaru Outback Wagon part #76227. The Draw-Tite hitch is a no drill installation compared to some of the other hitch options on your vehicle that require drilling holes in the frame. It's also a…

view full answer...

Answer 11

You'll want to ensure your current factory hitch can be removed (it should be bolted on and not welded), and if so, there is a trailer hitch receiver with a concealed crosstube that does fit your 2010 Subaru Outback, which is from Curt. Since you…

view full answer...

Answer 12

The Curt Trailer Hitch Receiver #C13410 will fit up snug against the bumper of your 2010 Subaru Outback Wagon and if you reference the linked instructions you can see that you actually need to trim some of the bumper fascia. As for how far out past…

view full answer...

Best Hitch for 2016 Subaru Outback for Trailer and Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching