Draw-Tite Max-Frame Trailer Hitch Installation - 2019 Subaru Outback Wagon Video

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

The best hitch for your 2017 Subaru Outback wagon will be the Draw Tite hitch part #75673 which is a Class III hitch with a 2 inch opening. This hitch size gives you the most flexibility with hitch accessories and the best capacities as well. I…

I went out to the warehouse to take the measurements you asked for and found that the hitch measured approximately 2-1/2 inches from the center of the hitch pin hole to the end of the receiver. In terms of the receiver depth of the Draw-Tite #76227…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, the mounting bolt patterns are similar between the EcoHitch #306-X7266 for a 2018 Subaru Outback Wagon and the EcoHitch #306-X7601. With that being said, the hitch receiver for the #306-X7266 sits about 1/4" to 3/8" lower than the…

The best trailer hitch for your 2019 Subaru Outback Limited is the Curt #C13206 because it has the best bumper clearance among hitches that fit your car; this hitch is a fit for both the 2.5i Limited and 3.6R Limited. This Class III, 2" trailer…

To install the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 on your 2018 Subaru Outback you only need a torque wrench capable of more than 50 ft. lbs, which is going to be most of them. I recommend getting one that has a wider range for other…

The Draw-Tite Max-Frame Trailer Hitch #76227 will absolutely fit your 2019 Subaru Outback so long as it is not the Sport model. The accompanying photo shows this hitch installed on a '19 Outback so you can see for yourself what it will look like.…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

The Draw-Tite Hitch Receiver part #76227 on the 2019 Subaru Outback Wagon requires 4 inch by 4-1/2 inch square cut out on the bottom/center of the fascia. To find the center of the fascia measure 2 inches (toward the driver side of the fascia) from…

Of the hitches that fit your 2018 Subaru Outback that you mentioned none of them would put more stress on the frame of the vehicle than the other. The Curt you mentioned part #C13410 is a really great option that I would recommend highly. I attached…

The Thule T2 Pro XTR 2 Bike Platform Rack #TH83JV is a very nice rack that will tilt-away, fold-up, and will hold the bikes by their wheels. That rack will allow bikes up to 60 lbs each and with tires up to 5 inches wide. The closest part of the rack…