Curt Trailer Hitch Installation - 2016 Subaru Outback Wagon Video

We carry a very handy 2 inch ball mount for this exact application. The part is #D210. The ball mount slides and pins into your hitch and the top receiver will accept 2 inch bike racks and hold them above the ball. The Ball Mount has a 500 lb tongue…

The best 4-way trailer wiring harness we have for your 2019 Subaru Crosstrek is the Curt #C56040 mainly because of the quality and reliability of the converter box. It has the highest amperage rating of all of the options which allows it to be the…

To see exactly where the port is for the install of the Tow Ready Harness part #118467 check out the install video I attached. It sounds like you have found the correct area by your mention of the blue wire that should be holding the harness to the…

I can certainly help you with that. Since the Curt T-Connector Vehicle Wiring Harness, part #C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights,…

We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific custom harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start with…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

Yes, the mounting bolt patterns are similar between the EcoHitch #306-X7266 for a 2018 Subaru Outback Wagon and the EcoHitch #306-X7601. With that being said, the hitch receiver for the #306-X7266 sits about 1/4" to 3/8" lower than the…

As long as the distance from the center of the hitch pin hole to the face of the hitch is at least 1-1/2" (see attached photo) you'll be good to use the Thule EasyFold XT #TH903202 with the OEM hitch on your 2018 Subaru Outback Wagon. If the…

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

I do have a 2 inch hitch that is a no-drill installation for your 2016 Subaru Outback. It is the Curt #C13410. These hitches are getting very popular with Subaru owners. I have linked a video showing an example installation for you. Although the…

I would be happy to help you and make a recommendation based on fitment. First of all you won't have to drill into anything to mount your 7-way vehicle connector. All you will need is the Curt Easy Mount Bracket item #C58000. This bolts directly…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 which is a fit for a 2010-2019 Subaru Outback will install via eight total 10mm nuts which are actually reused as they are the factory fasteners for the bumper beam. The most up to date…