Determining Which 5 Lug Trailer Hubs Fit 1971 Norris Camper Trailer
Question:
I have a 1971 Norris camper with 4 bolt lugs I want to switch it a 5 lugs hub what hub do I need
asked by: James M
Expert Reply:
I would be happy to help you determine the correct replacement hub with the 5 on 4-1/2" bolt pattern for your 1971 Norris Camper, but we do not have a breakdown of the specific components your trailer uses so you will need to take a few meaurements.
First you will need to determine your bearing combination. To do this you will need to remove one of your hubs and look for the bearing numbers stamped in the face of the inner and outer bearings as shown in the picture of the # L44649.
If the bearings are worn to the point that the bearing numbers are unreadable you will need to use digital calipers like # PTW80157 to precisely measure you spindle according to the diagram.
Next you will need to measure your spindle where the grease seal goes to confirm the correct grease seal.
If you can follow up with this information I would be happy to go over the available hubs for your trailer.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-201-5UC3-EZ Review
- Q&A: Do Timbren Axle-Less Suspension Systems have to be Professionally Installed
- Search Results: asr35hds01
- Search Results: 14125a
- Search Results: lm67048
- Search Results: 14276
- Search Results: 25520
- Search Results: 25580
- Search Results: timken 25580
- Shop: Timken Bearing Kit, LM67048/25580 Bearings, LM67010/25520 Races, 413470 Seal
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Grease Seals 10-36 (pair)
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: Timken 25520 Replacement Race
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Shop: Trailer Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Tire Sizing
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Shop: Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)