Is There an Issue Going from Load Range C tire to Load Range D  

A Kenda Karrier ST185/80R13 Radial Trailer Tire #AM10208 will have an outside diameter of of 24.7" when mounted and inflated. This is the same size as your 185x13 trailer tire.

In regards to replacing 175/80-13 tires with 185/80-13 tires, the only thing you really need to be aware of is the change in dimensions which is very minor (.7" diameter and .4" width). That said, you actually only lose .35" of…

You really need to stick to the same size tire for all of the wheels on your tandem axle trailer. If you go to a taller size the ride will be unpredictable, suspension and tires will wear out quicker, and the trailer won't set level. For a Kenda…

The Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 should be inflated to its max 65 psi. On trailer tires you want to inflate the tire to the maximum cold psi, which on this tire is 65. Doing this will give you the best…

Most trailer tires out there now are made in China but I would say that the Kenda Karrier part #AM10208 that you referenced is a reliable tire that will work well for you. We've sold quite a few of these tires and have had thousands of reviews at…

Generally speaking, you'll need at least 3" of space between the top of your wheel and the wheel well, so if you've got the extra room, bigger wheels/tires might be an option. Depending on what the Load Range your current ST175/80R13…

You will more than likely be just fine replacing your 175/80R13 tires on your boat trailer with ST185/80R13 tires like the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 due to them being so close in size. The ST185/80R13 will…

There is no need to further re-pack the bearings with the Bearing Buddies like the Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair) #BB2441. So long as you maintain the grease levels, repacking the bearings isn't necessary,…

Technically speaking, once the bearings are initially packed, you shouldn't need to repack them. I'd still recommend breaking the hub down occasionally to inspect the bearings and races to make sure everything's in good condition.

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…