Affordable ladder rack for 2018 Nissan Frontier

Question

Question:

Ladder rack that clears the roof for nissan frontier

asked by: Vernon S

0

Expert Reply:

I recommend taking a look at the Malone TradeSport Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs # MAL55VR. This is a very affordable setup that clamps onto the bed rails of your 2018 Nissan Frontier, as long as it is crew cab 5 or 6 foot bed without utili-track system, or if it is king cab 6 foot bed without utili-track system.

T-slot channels are integrated into the crossbars of this ladder rack, making it very easy to install a wide array of accessories like kayak carriers or bike racks etc. I attached a demonstration video of this ladder rack for you to check out.

expert reply by: Andrew N

0

Answer 1

Yes, the 7-Way to 4-Way/5-Way Trailer Adapter #C35FR can be used with trailers that have LED and incandescent lights. There will be no need for an additional adapter for your 2014 Porsche Cayenne.

view full answer...

Answer 2

It is pretty common for new vehicles to have issues with registering that a trailer with LED lights is connected due to the power draw being so much less than the computer on your 2021 GMC Sierra 1500 is expecting to see. What you need is the 7-Way…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 12

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...