Roof Rack For New Body Style 2020 Ram 1500 Crew Cab

Question

Question:

Some Rhino Racks such as the 2500 fit the Ram 1500 crew cab classic 5 lug nuts but not the new body style 6 lug nuts. Is this roof rack compatible with the 2020 Ram 1500 crew cab new body style?

asked by: Mike Y

0

Expert Reply:

The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Long # Y01-130B is confirmed to fit your 2020 Ram 1500 Crew Cab (new body style), however, this is specifically for a camper shell or hard tonneau cover and will not fit your roof.

For a roof rack that is compatible with your roof I would look at the Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long # TH711520. You will also need Feet # TH710501 and Fit Kit # TH145199. These are low-profile aerodynamic crossbars which will reduce noise and vibration. This system also features a T-slot channel on top which allows for many accessories to be easily installed or removed. The weight capacity is 165lbs but be sure you never exceed the weight capacity of your vehicle's roof. I attached a demonstration video for you to check out regarding this Thule system.

expert reply by: Andrew N

0

Answer 1

The 220 lb weight capacity of the Rhino-Rack Roof Rack System #Y01-130B that you referenced is a dynamic weight capacity. This means it's the weight it can carry when on the road. Static would be capacity standing still which Rhino Rack does not…

view full answer...

Answer 2

The Timbren Rear Suspension Enhancement System #TDR2500CA will fit your 2004 Dodge Ram 1500 Quad Cab truck.This kit will work for either the 2 wheel or 4 wheel-drive models. The Timbren Aeon rubber springs will improve your vehicle's suspension…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 5

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yes. You will need to use everything included with the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - Black - 65" #Y01-140B-NT to install into the tracks you have pictured. The bases of the legs mount right into the…

view full answer...

Answer 12

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...