Can Roof Rack Tracks be Installed on A.R.E. Truck Cap

Question

Question:

Can tracks be installed on a are truck for a rack system

asked by: D M

0

Expert Reply:

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours.

To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set of round crossbars like the the 66 inch # Y00410.

I have attached a customer image of this system installed on a similar cap to yours that you can take a look at as well.

expert reply by: Chris R

0

click to enlarge

Geoffrey T.

5/22/2020

Are cap track system ! Rack system for roof top tent , long enough bars for tent and two kayaks, will needed carries for kayaks, everything lockable,plus all fasteners,please price and contact me thank you

Reply

Chris R.

5/25/2020

For the track system on your A.R.E. cap I recommend the Yakima setup that consists of # Y00221 for the Landing Pad and # Y8890027 for the Mounting Feet, along with a set of appropriately sized round bars. You could go with the 78" # Y00411 and simply cut them down to size if needed. For the kayak carrier I really like the Yakima JayLow # Y04073, which can secure both kayaks. For a lock kit to secure everything into place the Same Key # Y07206 will work perfectly.

Reply

Geoffrey T.

5/25/2020

@ChrisR thanks so this a track system and feet ,bars,2 kayaks carries ,Work with a roof top tent together? The track system mounts to the fiberglass cap? Is this a low profile system? Please price and total purchase thank you

Reply

Chris R.

5/28/2020

@GeoffreyT Assuming your kayaks aren't super wide, you'll still have enough room to attach a roof top tent at the other end of the crossbars. The bars will sit about 3-1/2 to 4" above your cap. All pricing is listed on the product pages.

Reply

See All (5) Replies to Geoffrey T. ∨

Answer 1

To charge a battery for use in your trailer you will need to either use the CTEK MULTI US 7002 12-Volt Universal Battery Charger w/ Pulse Maintenance #CTEK56353 when you have your trailer parked, or use the Dual Battery Charger #331-BCDC1240D. The…

view full answer...

Answer 2

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 3

You will need to install tracks to your fiberglass cap and then you can attach a roof rack to those tracks. I recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Standard - 54" Long, part #Y02-480B. This is a…

view full answer...

Answer 4

In most propane appliance situations, there is a regulator located at the tank, followed by a supply line. In that situation, what passes through the hose after the regulator is low pressure gas. Low pressure gas is harmless to rubber. The buddy…

view full answer...

Answer 5

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Answer 6

For your A.R.E. Truck Cap that features the Yakima tracks, you will just need 4 of the Yakima Control Towers #Y8890027, 2 sets of the Yakima Landing Pad #Y00221, and one set of Yakima crossbars, which come in varying lengths. For 58 inch bars use…

view full answer...

Answer 7

Yes, the Rhino-Rack Pioneer Platform Rack - Factory Track Mount - 84" Long x 56" Wide #JA9084 will work with the Yakima Roof Tracks with adapter kits. I reached out to my contact at Rhino-Rack and confimed a fit for this platform rack and…

view full answer...

Answer 8

The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long #Y02-490B will be well under 1 foot. The leg height is listed as 3 inches, the crossbar height is 1-1/2 inches, and the track is approximately 1/2 inch…

view full answer...

Answer 9

I have a great option for you from Inno since your 2001 Toyota Tundra has gutters to mount the roof rack. You will want to use the Inno Feet for Square Crossbars #INSD. These feet are a gutter mount style, so they will attach directly to the gutters…

view full answer...

Answer 10

We do have what you need in order to install a roof rack on the camper shell of your Toyota Tacoma with a 5 foot bed, and you'll need to start with a track system. Since you have a short bed (and therefore shell), I recommend going with 50 inch…

view full answer...

Answer 11

Yes, to install a Thule roof rack system using the Yakima tracks already on your A.R.E. topper you will just need the Thule Fit Kit #THKIT3101, the Podium Feet #TH460R, and a set of crossbars like the 60" WingBar Evo #TH711520. This will provide…

view full answer...

Answer 12

There are roof racks available that you will be able to install on your Leer camper. There are no special mounting brackets needed, but you will need to install tracks that the roof rack feet will sit in, and the crossbars will then attach to the…

view full answer...

Can Roof Rack Tracks be Installed on A.R.E. Truck Cap

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching