Rhino-Rack Heavy-Duty Roof Rack for Camper Shells - Track Mount - Black - 59" Bars

See what our Experts say about this Rhino Rack Roof Rack

• Will the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells Work with an Insulated Lear Top
  I contacted Rhino-Rack to ask about this. The Heavy-Duty Bar Roof Rack for Camper Shells, part # Y01-130B, does not have any warnings about insulation, so they said this should work fine for you. As a point of reference for the bolts themselves, they are M6 bolts. If they do not happen to be long enough, you can pick up longer ones at your local hardware store in the off chance these do not reach your needed length.
  view full answer...
• How Wide Should Tracks Be Installed on Truck Topper for Roof Rack
  Where you install the tracks on your Rhino Rack Heavy-Duty Bar Roof Rack # Y01-130B depends on the width of the bars that you're using in most cases, but you'll also want to make sure that the tracks are able to sit flat on the topper. The bars that come with the # Y01-130B are 59" long, and you'll want to make sure the bars overhang on each side the same distance. I've linked the instructions for installation, but there are not specific instructions for your Leer XR100 topper; you may...
  view full answer...
• Roof Rack Recommendation for Camper Shell with Tracks and Crossbars
  We have the Yakima Kit part # Y01617 which gives you a roof rack that has 60 inch long crossbars and 42 inch long roof tracks as a complete kit. This should be a good fit for your 8 foot long bed camper shell.
  view full answer...
• Will Rhino Rack Heavy Duty Bar Roof Rack for Camper Shells Fit Leer Camper Tracks
  Yes the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-130B will fit in the tracks you have on the top of your Leer camper shell.
  view full answer...
• Recommended Roof Rack for Leer Truck Cap on 2012 Nissan Frontier
  We can offer you several choices in a square bar roof rack that can mount to your Frontier's Leer bed cap that you can see by clicking on the link provided. Since you prefer square bars I suggest the Rhino-Rack track-mount system # Y01-130B. It uses 59-inch heavy-duty crossbars and offer a 220-lb weight capacity, but you'll want to check on the weight rating of your Leer cap to be sure you do not overload it.
  view full answer...
• Is Weight Capacity of Rhino-Rack Roof Rack System Y01-130B Static or Dynamic
  The 220 lb weight capacity of the Rhino-Rack Roof Rack System # Y01-130B that you referenced is a dynamic weight capacity. This means it's the weight it can carry when on the road. Static would be capacity standing still which Rhino Rack does not offer that figure.
  view full answer...
• Can The Rhino-Rack Heavy Duty Crossbars Be Cut To Length For My Camper
  Yes, the Rhino-Rack Heavy-Duty Crossbars can be cut to length, so you would be able to put them on a narrower camper. The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount - Silver - 59" Long, part # Y01-130B, has tracks that would mount to the top of your camper with T-bolts. Please keep in mind that some drilling will be required. Once the tracks are installed you can mount the Rhino Rack legs. These legs can be adjusted anywhere along the tracks with the quick-release...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells Work with a Curved Roof
  Yes, the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells part # Y01-130B does have some play so there will be no issues conforming to the roof shape. There are very few completely flat camper shells so the roof curvature was built into the design of the rails therefore you won't have issues.
  view full answer...
• How do You Install a Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells?
  The manual for the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-130B instructs that the tracks be placed closest to the outside edges of the canopy as possible (this is where you said that the roof curves thinner). This will ensure the maximum strength of the rails. With that being said, it is important to check the underside of the canopy to make sure that the knobs have sufficient clearance to be located. I went ahead and attached the relevant screenshot from the manual...
  view full answer...
  
• Availability of Rhino Rack Roof Rack Crossbars that Fit Thule Camper Shell Tracks
  Rhino Rack has the Rhino-Rack Roof Rack for Factory Tracks # Y01-130B which fits the Thule tracks you have on your camper shell and is 54 inches in length like you are wanting. This is an aero bar setup but if you prefer the HD bar shape instead you'd want the part # Y01-120B.
  view full answer...
• Square Bar Roof Rack for a Leer Truck Cap on a 2002 Toyota Tundra
  We do have some great options for your 2002 Toyota Tundra with Leer truck Cap. But, we do not have any that fit what you are looking for and do not require rails to do so. The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-130B are 59" and use square bars. The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-140B are 65" and use square bars. Both of these options use 63" long tracks and have a weight capacity of 220 lbs. and have a limited lifetime warranty.
  view full answer...
• Roof Rack That Can be Installed on Leer Camper
  There are roof racks available that you will be able to install on your Leer camper. There are no special mounting brackets needed, but you will need to install tracks that the roof rack feet will sit in, and the crossbars will then attach to the feet. The correct bars are going to depend on the length you need, so you'll want to take a measurement of the width of the camper shell and choose from there; you can also choose from either silver or black crossbars. The correct rack will be...
  view full answer...
• Camper Shell Roof Rack and Canoe Carrier Recommendation for 2020 Chevy Silverado 1500
  Best option will be a roof rack setup for the camper shell like the Rhino Rack Aero Kit part # Y01-130B. Trying to have a bar setup that's level between the camper shell and the truck cab is typically more trouble than it's worth but if you go with a rack for the camper you'll have a much easier time overall. Then for a canoe carrier the Yakima KeelOver part # Y04069 is a really great option for carrying the canoe upside down.
  view full answer...
• What Parts Are Needed To Install Roof Rack On Leer Camper Shell With Tracks?
  The Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells 59" # Y01-130B that you were looking at include the tracks, crossbars, and legs. This system needs to be drilled into a camper shell. Since you already have the Thule tracks, you can simply install Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars 65" # Y01-140B-NT. This includes the 65" crossbars and legs that fit your tracks and you don't need anything else to install and use this system.
  view full answer...
• Heavy Duty Rhino Rack Roof Rack System With Trackmount Dimensions And Weight Capacity
  The Rhino-Rack Roof Rack System w/ 2 Heavy-Duty Square Crossbars - Track Mount - Black - 59" Long # Y01-130B is the exact same product you will find on the Rhino-Rack website. It will use the same legs # RRRLT600 and will use the same heavy duty crossbars 59 inches by 1-5/8 inches by 1-7/8 inches. It has a track length of 63 inches and weight capacity rating of 220 lbs. This is the same exact product you are comparing on the manufacturer's website. I've attached the installation details...
  view full answer...
• Truck Camper/Topper Roof Rack System for a 2011 Ford F150 Crew Cab with 5-1/2 Foot Bed
  Rhino Rack produces a full range of track kits that will work on your truck topper. You simply need to choose the length and color for the vehicle. All of these kits include a set of Rhino-Rack Vortex Aero crossbars that have c-channel mounts and are quick-slide to move forward and backwards along the rack as you need it. They are all inclusive and don't require additional parts. 54 inches long, part # Y02-480B 59 inches long, part # Y02-490B 65 inches long, part # Y02-500B There are...
  view full answer...
• Will the Rola Haul Your Might Work with the Access Soft Roll Up Cover
  We have a solution but unfortunately the Access Limited Edition Soft Roll-Up Tonneau Cover part # A23239 and the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799 are not compatible together. For use with the Access cover you can use the Rhino-Rack Heavy-Duty Bar Roof Rack part # Y01-130B. This will give you cross bars that attach to tracks you can fasten to the top of your bed rails. This is not a cargo rack but is the only one I ca find here that will work with that cover.
  view full answer...
• Does The Rhino-Rack Heavy-Duty Roof Rack for Camper Shells # Y01-130B Include Load Stops?
  The Rhino-Rack Heavy-Duty Roof Rack for Camper Shells # Y01-130B does not include load stops, but we do have 2 sets you can select from. The Load Stops # RRRLH1 are the easiest to adjust if you will need to move them often. These are 5" tall as well are the Load Stops # RRRLH. These are not as easily adjustable as they require a wrench to adjust.
  view full answer...
• Is Aero Y02-490B Rhino-Rack Roof Rack Better Than Square Y01-130B For Camper Shell
  The Rhino-Rack is a great choice to add a rack system to your camper, and while the square Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-130B has its uses, when it comes to using the rack for accessories and/or a tent, the best option is definitely the rack with aero-shaped bars: - Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B Both racks have the same 220 lb capacity so you aren't losing anything in that regard by going with aero bars, and aero bars are going...
  view full answer...
• Recommended Rhino-Rack Roof Rack System for Retrax ONE XR Tonneau Rails
  I have a solution for you, but the Rhino-Rack # Y01-130B will not fit in the Retrax XR Rails. Instead, the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 71" Long # RRVA180B-RRRLT600 is designed to fit in the XR rails and will give you a similar roof rack system. This comes with the feet and bars and everything you would need to install this rack system. I've linked a review video of this for you to check out as well.
  view full answer...
• Roof Rack And Cargo Basket For 2017 Dodge 2500 Megacab With A.R.E. Overland camper
  The Rhino-Rack Roof Rack System # Y01-130B comes with two heavy-duty crossbars and the tracks to attach to the camper. The included tracks are 63-inches long and the crossbars are 59-inches long and measure 1-5/8 inches wide and 1-7/8 inches tall. The roof rack has a 220-lb weight capacity. The Yakima MegaWarrior Roof Basket # Y07080 measures 52-inches long x 48-inches wide x 6-1/2-inches tall and has a 130-lb weight capacity. The MegaWarrior is also available with an extension that...
  view full answer...
• Recommended Rack For A 2022 Ford F-250 Super Duty Crew Cab Camper Shell
  I recommend the Rhino-Rack Heavy-Duty Roof Rack for Camper Shells # Y01-130B for your 2022 Ford F-250 Super Duty Crew Cab. This adjustable camper rack system allows you to carry gear on camper shells, hard tonneau, or hardtop resin roofs without headliners. The rack has a weight capacity of 220 pounds and has a limited life time warranty. The bars have a stainless steel construction that has an anti-corrosion coating. If you ever want to haul kayaks with your truck you can install the...
  view full answer...
• Does Rhino Rack Roof Rack for Camper Shells also Fit Kuat Trio and Rola Cargo Basket
  Yes all three of the components you mentioned are compatible with each other. The Rhino Rack roof rack part number # Y01-130B will fit your camper shell, the Kuat bike carrier # TR02 fits the bars of the rack, however, the Rola Cargo Basket is no longer available. Instead, I would suggest the Thule Canyon # TH859XT. With these three, you will be good to go.
  view full answer...
• Roof Rack Compatible with Thule Tracks on a Leer 100XR Camper Shell to Carry a Kayak
  We do have a roof rack system that will fit the Thule tracks on your Leer 100XR camper shell, but the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-130B mounts into Rhino-Rack RTC-style roof rack tracks, not Thule tracks. Since you already have Thule tracks, you would want to use the Rhino-Rack Roof Rack for Factory Tracks # Y02-480B-NT for aero bars or # Y01-120B-NT for the HD crossbars. We also have the Rhino-Rack J-Style Kayak Carrier # S510 to carry your kayak. This...
  view full answer...

Do you have a question about this Roof Rack?