Recommended Trailer Hitch and Class Ratings for a 2016 Jeep Wrangler

Question

Question:

What class c hitch fits my 2016 Jeep Wrangler 75th Anniversary edition? It has factory steel bumpers. Thanks.

asked by: Jack

1

Helpful Expert Reply:

The trailer hitch class ratings for passenger vehicles use numeric values, not aliphatic. These values include Class I, Class II, Class III, Class IV, and Class V. The trailer hitch options for a 2016 Jeep Wrangler (All Models) are class III, the etrailer Trailer Hitch Receiver part # e98856 is what I recommend.

expert reply by: Conner L

1

Answer 1

I do have a potential option for you, but we do not carry a 4" long extension for a 2" hitch. The shortest extension we carry is the Yakima #Y69VR which is a 7-1/4" extension. From there everything we have is 8" or longer. Please…

view full answer...

Answer 2

For your 2023 Jeep Wrangler Unlimited, we have the etrailer Trailer Hitch Receiver #e98856. This hitch is made in the USA, has a bolt-on installation and will provide you with a 2" receiver. The 2" receiver is the most common size used for…

view full answer...

Answer 3

You will definitely need an extension to clear the rear tire on your 2021 Ford Bronco. When we installed the Yakima OnRamp #Y36FR on a 2021 Bronco we had to use the Yakima StraightShot Hitch Extension #Y69VR to make it fit. Normally bike rack…

view full answer...

Answer 4

The Hitch Extender For 2" Trailer Hitch Receiver, part #HE06, will give you an extra 7 inches of room. You will need to measure out 7 inches from the the pin hole on your hitch and that will tell you where your bike rack pin hole will connect…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...