What is the Capacity of Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001  

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

I attached a dimension picture I got from Lippert for the Replacement I-Beam Jack Bracket #LC349975 that you referenced.

The Replacement Ball Assembly #UF19-001057 that you referenced can be used with an Andersen Ultimate fifth wheel adapter but it has to be used with an Ultra Fab stabilizer like the #UF19-950500 since we can't guarantee it would work on an EAZ…

Yes, since you sent me a picture that shows you have a Venture landing gear set on your 2002 Jayco Eagle the landing gear repair kit part #LG-146059 that you referenced is exactly what you'd need.

Any powered landing gear or powered tongue jack will draw less power as it legs descend down toward the ground and much more as soon as they make contact and encounter resistance. This is a normal occurrence. In the same way, any jack - even a manual…

The repair kit, part #LG-146059, doesn't come with instructions probably because it's assumed you can just reverse what you did to take the jacks apart. Obviously since you aren't the one who took it apart this doesn't work for you. I…

To help I have included the written instructions below and also a diagram that points out the parts mentioned in the written instructions for the entire kit for the replacement gear and shaft kit for your Venture landing gear leg. The instructions…

Atwood was sold to Dometic a few years back and replacement parts for older landing gear are scarce. We do still have Stromberg Carlson Landing Gear repair kit for the follow jack that will fit, part #LG-146060. For a lead jack repair kit use…

I have attached a photo for you that shows how to properly measure the outer tube on a landing gear leg. I have not heard of a landing gear leg with a 36-1/2" long outer tube so if this is what you have then I recommend you replace both the lead…

I have spoken with Lippert about the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC675817 in they past and they informed me that the most important aspect is that the battery/batteries are sufficiently charged, between 12.4…

The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817 is designed for use with fifth wheels and would work extremely well for your 2006 Keystone Raptor. It has six jacks, with two landing gear jacks that mount to existing…

While there may be something wrong with the main control panel I recommend verifying the mounting of both the front and rear sensors. If these sensors are not fixed in a position where they will not move or are pointed in the wrong direction that…