2007 Crossroads Cruiser 5TH Wheel Camper Will Not Auto Level With 6 Point Lippert Ground Control 3.0

Question:

2008 Crossroads Cruiser CF31MK I have set the level a few times and it keeps on going back and forth between sides and lifting the tires off the ground and than erroring out. I also had to reset home because of other error messages when I first turned it on. Able to retract the jacks thankfully after each attempt to auto level. Is there something wrong with the brains on this unit? I did the install on a nice level cement floor of the barn in which I keep the trailer.

asked by: John R

Expert Reply:

While there may be something wrong with the main control panel I recommend verifying the mounting of both the front and rear sensors. If these sensors are not fixed in a position where they will not move or are pointed in the wrong direction that will cause issues when you are trying to auto level. Both sensors have arrows that point towards the front of the trailer as well as indicate which side should face up or down.

If your sensors are all mounted correctly you will want to ensure that the area you are attempting to level your 2008 Crossroads Cruiser CF31MK is level enough to allow your trailer to auto level. If there is to much of a hill from front to back or side to side the jacks will continue to raise to maximum height and throw an error code. You should verify your system is working properly on the level ground like you have in your barn. If you still have errors on the flat ground you likely have something else wrong.

If you can tell me what error codes exactly you are getting when it happens on flat ground I can attempt to determine if there may be something else wrong with your system.

expert reply by: Bud M