TrailAir Air Ride Pin Box Installation
Question:
I just installed the TrailAir pinbox on my 5th and it has the 5th hitch pin plate sitting slightly down hill to the front of the truck now when hooked up Does it matter if it doesnt sitt fairly level when towing?.
asked by: Travis M
Helpful Expert Reply:
Due to the resistance provided by the airbag, it is not unusual for a TrailAir pinbox to be at a slight downward angle toward the front of the truck.
When the TrailAir was installed, was there any play between the turret bolts and the holes in the mounting flange on the fifth wheel and the turret? If so, I would recommend loosening (but not removing) the bolts and readjusting the pin box to ensure that it is level to the trailer. Then re-torque the bolts. You will also want to ensure that you have not over inflated the air bag, which could cause the forward tilt you have described.
When the pin box and hitch are connected, the important thing is that the pin box skid plate that surrounds the king pin is making full contact with the skid plate of the 5th wheel hitch. As long as this is the case, a slight forward tilt would not be anything to be concerned about.
Product Page this Question was Asked From
Curt Air Ride 5th Wheel Pin Box - Lippert 1621 & 1621HD - 21,000 lbs
- Fifth Wheel King Pin
- Upgraded Pin Box
- Absorbs Road Shock and Reduces Chucking
- 21000 lbs GTW
- Fixed Turret
- Lippert 1621HD
- Lippert
more information >
Continue Researching
- Shop: Curt Flex Air 5th Wheel Pin Box - Lippert Rhino - 21,000 lbs
- Shop: Trailair Air Ride 5th Wheel King Pin - Fabex 730, RBW 7019 - 21,000 lbs
- Q&A: Will Lippert Trail Air LC158777 Pin Box Provide More Clearance than Existing Trail Air Rota-Flex
- Q&A: How Much Room Is Needed To Install SumoSprings On A Trailer
- Q&A: How To Determine Which Pin Box I Have and What Replacements Are Available
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Search Results: trail air pin box
- Search Results: trail air pin box
- Search Results: king pin box
- Shop: Trailair Air Ride 5th Wheel Pin Box - Lippert 1116 - 21,000 lbs
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung
- Shop: Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
- Shop: Fifth Wheel Hitch
- Search Results: trailer wheels center caps
- Shop: Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621/1621HD - 30K - 4.5K TW
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Search Results: 25580
- Video: Choosing the Best Fifth Wheel Hitch
- Shop: Trailer Hitch
- Video: Manufacturer Review - Demco Autoslide 5th Wheel Trailer Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25980ez
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Video: B and W Companion OEM 5th Wheel Hitch with Slider Installation - 2022 GMC Sierra 2500
- Q&A: How to Determine Correct Height Setting for 5th Wheel Hitch
- Search Results: 60692