Lippert Electric Travel Trailer Leveling System Installation - 2018 Forest River Flagstaff V-Lite Tr Video

Yes, the spring width would matter when using the Dexter Over Under kit part #K71-384-00 that you referenced. If you check out the picture I attached you'll see that if the spring was too wide the u-bolt holes of the plate wouldn't fit around…

We have gotten this question before and Firestone has told us that even though the Firestone Ride-Rite Air Helper Springs #F2582 have not been tested specifically with wheel well liners, they have not heard of any issues regarding their installation…

I checked with Lippert and they told me that each of the jacks of the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 that mount on the trailer frame have a height range of up to 19 inches.

Since your 2017 Grand Design Imagine 2500RL Travel Trailer has a GVWR of 6,995lbs the Lippert Electric Ground Control TT Automatic 5-Point Leveling System #LC672136 will fit perfectly. This system is designed for trailers with a GVWR of up to…

I recommend going with the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW #BLU66FR to pull your Grand Design Imagine 2670MK RV. This is a very impressive weight distribution system that is much quieter…

I attached a picture that has the most current instructions on finding the zero point calibration with the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 that you referenced.

The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 lbs #LC672136 can compensate for up to the amount of drop the jacks provide. So while you don't have to be perfectly level, the rear jacks have a maximum of…

I checked with Lippert and for your electrical stabilizer jacks #LC298707 the only maintenance you need to perform is to keep the setup clean if you ever travel in harsh conditions like if there's salt on the road. Here's what they state: It…

This has been asked before and unfortunately there is no replacement leg option offered by Lippert for the: -Lippert High-Speed Power Stabilizer Jack #LC298707. If your leg has become damaged, the only solution is to replace the entire unit.

The replacement motor you need is the ##LC352338 for your Lippert Components Power Stabilizer Jack #LC298707.

There are not replacement legs available for the Lippert Components High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift #LC369774 which is the same as the 198641 you mentioned. You will need to replace the entire unit. The support arm…

Lippert #LC672136 is the best trailer leveling kit for your Lance Travel Trailer. They have an overall weight capacity of 10,000 pounds and are straight forward to install. I have attached a video walking you through the installation process.