Review of Dutton-Lainson Winch Socket Drill Adapter - DL6456 Video

As long as your winch is a Dutton Lainson B series winch, you can use the #DL6456 socket on it. The socket fits in 1/2" drill and measures 13/16" x 13/16" (outside). The number that you mentioned is just a number used to identify the…

We can help you with a winch but not with a large wheel like in the picture you mentioned. They have several winches designed for boat lifts and those winches are compatible with the big wheel you mentioned. These include the following: Heavy Duty…

The Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs #DL14958 you asked the question from is a great option for your boat lift. This is a very nice option that will keep the handle from free-wheeling and possibly hurting…

The gear ratio of winch #DL24844 would be 18.75 turns of the handle for one complete revolution of the drum. You could say that one revolution of the drum is 3-1/8 inches and that would be 288 turns of the handle for 4 feet. You might be able to…

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

I went out to our warehouse and got the following dimensions for the Stabilizer Jacks #TJ01RT-HD in the stowed position. I have included an image below so you can see the points I measured from. The overall length is 12-3/8" long, 4-3/8"…

The Dutton-Lainson #DL11002 winch you referenced has no minimum load requirements, and has a 40:1 gear ratio.

For a worm gear winch that you can use with a strap instead of a cable I recommend #DL11002. You could then use strap #DL24242. You will need to add the hex shaft, #DL406102, in place of the standard shaft to use a variable speed drill with the…

The Dutton-Lainson Worm Gear Hand Winch, #DL10950, cannot be used with a nylon strap. This is a cable only application that would work well to raise and lower your 50 lb rooftop carrier if your set up allows use of a cable If your set up requires a…

The Hex Shaft for Dutton-Lainson Worm Gear Winches #DL406102 that you referenced is designed to fit Dutton-Lainson worm gear winches so yes, it will work on the Worm Gear Hand Winch #DL11002 that you referenced. However, this product is designed to…

The square portion of the Dutton-Lainson Drill Drive Socket Adapter #DL6456 measures 13/16" x 13/16" and fits a 1/2" electric drill. I have attached a photo to demonstrate this.

The Dutton Lainson Worm Gear Winch part #DL10950 that you referenced would do an excellent job. This is the only style of hand winch we offer that is safe to use to suspend items in the air. This winch also does not have a free wheel option, so under…