Looking for Small Diameter Skid Wheels for Rear of Aluminum Trailer
Question:
Good afternoon. I was wondering what caster wheel setup I should use for the rear of my aluminum trailer to keep the rear from bottoming out? I know you should not mount steel to aluminum. I would also need the smallest one possible as my trailer already sits pretty low. Thanks
asked by: George S
Expert Reply:
What you're looking for are referred to as skid wheels, which are used on the rear of a trailer to prevent the back of the trailer from bottoming out. The smallest diameter skid wheels we offer have a 3 inch diameter, part # UF48-979017 which mounts to 2-1/2 inch square tubing or # UF48-979018 for 3 inch square tubing.
As far as isolating the aluminum frame members from the steel housing and mounting hardware, we don't sell anything specifically designed for that task for this product, but I've seen folks use cut up pieces of bicycle innertube to prevent the steel and aluminum from coming directly into contact.
When backing your trailer, I'd recommend doing so with the greatest of care. Aluminum is much softer than steel, so the chances of bending the frame member that the skids are bolted to will be pretty good if you're not careful.
I've linked to product description videos for both kits.
Products Referenced in This Question
Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2
- RV Skid Wheels
- Hitch Mount
- 3 Inch Diameter Roller
- Bolt-On
- Ultra-Fab Products
more information >
Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 3" Hitch Tubing - 3" Diameter - Qty 2
- RV Skid Wheels
- Hitch Mount
- 3 Inch Diameter Roller
- Bolt-On
- Ultra-Fab Products
more information >
Product Page this Question was Asked From
Ultra-Fab Skid Wheels for Class A RVs 34' and Longer - 6" Diameter - Qty 2
- RV Skid Wheels
- Frame Mount
- 6 Inch Diameter Wheel
- Weld-On
- Ultra-Fab Products
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches
- Shop: Ultra-Fab Steel Jumbo Roller for Trailers and RVs - Weld On - 2-1/2" Wide x 3" Tall
- Shop: Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2
- Search Results: trailer skid wheels
- Search Results: weld on steel rollers
- Search Results: steel rollers
- Shop: Buyers Products Stake Pocket Spare Tire Mount
- Shop: Ultra-Fab Skid Wheels for Low-Profile RVs up to 30' Long - 4" Diameter - Qty 2
- Shop: Ultra-Fab Steel Mini-Roller for Trailers and RVs - Weld On - 1-1/2" Wide x 2-1/2" Tall
- Shop: Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 3" Hitch Tubing - 3" Diameter - Qty 2
- Search Results: skid plates
- Search Results: lift kit
- Search Results: tow mirrors
- Q&A: Recommended Bolt On Hangers For Aluminum Frame Trailer
- Search Results: trailer mat
- Q&A: Best Way to Lift Tandem Axle Trailer Suspension 2 inches
- Article: How to Choose the Right Trailer Hitch Class
- Video: Lippert Solera Slider Slide-Topper Installation - 2021 Grand Design Reflection Fifth Wheel LCV000165
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: Ultra-Fab Products Skid Wheels - Frame Mount - UF48-979023 Review
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Video: Titan Trailer Brakes T2385200 Review
- Article: Trailer Tire Sizing
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Brake Controller Installation: Starting from Scratch