Review of Ultra-Fab Products Skid Wheels - Frame Mount - UF48-979012 Video

Thank you so much for the info and the pictures! According to my research it looks like your Cummins Onan RV Generator uses a 3/8" NPT Female fitting so you'll need a hose like part #100040-144-MBS. I have attached a link to all of our hose…

There are three ports on the MB Sturgis High Capacity Auto Changeover Regulator 108260. The two 1/4" female inverted flare inlets will attach to the propane tanks with a hose like the MB Sturgis Propane Pigtail part #100575-12-MBS and the single…

I have a solution for your 2017 Grand Design Momentum 376th, but there is a not a SuperSprings or Sumo Springs product designed for this application. The best solution to improve the handling and reduce chucking and porpoising on your trailer is the…

The best way to determine which replacement shocks will work is by matching up the length of the old ones as close as possible and then also using the GVWR of the trailer. If your brackets are 12-1/2" apart, and the GVWR of your trailer is…

From what I have found, it looks like you have tandem 7,000 lb axles on your 2014 Prime Time Sanibel 3600. Assuming that is the case, we have two different replacement shocks available for two different systems. If you have the Lippert Bolt-On Shock…

If you are looking to add shocks then measure using the following procedure: Compress the shock all the way (A) then mark the inner leg where the outer leg stops. Then release compression and measure the stroke (how far the shock moves) (B). Then…

The Ultra-Fab Steel Jumbo Roller #UF48-979023 you were looking at comes as a quantity of one, so if you're needing a pair you'll need to order two.

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

The tandem axle lift kit part #RR23QX that you referenced will raise your suspension height 2 inches but looking at your trailer it looks like the leaf springs are pretty flat and in need of replacing. That will give you some additional height as…

Here are the instructions for Swivel Skid Wheels #UF48-979012 1. Position a board as shown in Illustration 1. Place one end of board just behind rear wheels. Prop up the other end of board so board comes in contact with the lowest point of RV’s rear…

The rebound clip is a pretty important piece on the leaf spring stack so I wouldn't really say it is okay to use your trailer without them. The rebound clips are designed to hold the leaf spring stack together so that when you hit a bump in the…