Options for Installing 7-Way Trailer Connector on 2004 Ford F150 Equipped with 4-Pole

Question

Question:

Great web site! I have a 2004 Ford F-150 with a 4 pole. 30717 looks like it would work fine. Do you have a video for installation on an earlier Ford F-150? I assume I would need a brake controller for in the cab. Which one would you recommend? I would also need the mounting bracket and extra cable. What else would I need for installation? Thanks

asked by: Jerry

0

Expert Reply:

Although the # 30717 will work, I have a better suggestion for you. If your F150 is the New Body style, use part # 118247. If you have the Old Body style, use # 118242. Either connector will plug inline with your existing trailer connector, allowing you to retain the function of your existing 4-pole. Either kit includes the necessary fuses and relays to activate the remainder of the tow package circuits. Granted, this is a more expensive option, but it will be a very quick and easy plug-and-play installation.

A mounting bracket for the 7-way, # PK12711U is sold separately.

If the trailer you are towing is equipped with electric brakes, and you would like them to actuate, you will indeed need to install a brake controller. I can highly recommend the Tekonsha Prodigy P2, part # 90885.

You will also need the # 3035-P wiring adapter. One end of the adapter will plug into a Tekonsha brake controller, the other end plugs into the connector located under the dash, as you can see in the photo I have edited for you).

If you would rather install the 30717, use the # 37185 instead, which also provides a 4-pole connector. I will link you to an install video showing how to install the connector. Keep in mind, you might need some extra fuses and relays to activate he 12-volt accessory circuit that feeds the 7-way which are available from the dealer. The brake controller would install in the same manner as described above.

I will also link you to a video showing a P2 being installed in a 2004 F150.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Class III Curt trailer hitch part #C13418 that you referenced has a 5/8 inch diameter hitch pin hole which is standard for the 2 inch hitch size. So the Curt anti-rattle device 22323 part #C69HR would fit.

view full answer...

Answer 2

We have the Replacement Jack Handle #ORJW750SH which will fit your Xtreme Off-Road Swing-Up Trailer Jack #ORJW750BD. This handle has a zinc finish as opposed to the black finish on your jack.

view full answer...

Answer 3

To use the Curt Echo Wireless Trailer Brake Controller #C51180 your vehicle only needs 12 volt, ground, and turn signals connected to its 7-way socket. What this means is you do not need the brake signal from the 7-way. For example, if you used a…

view full answer...

Answer 4

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 5

I recommend using the Roadmaster wiring for your 2024 Ford Maverick because I've found it to be the most reliable on the market. The correct kit depends on if your Maverick has LED lights or not: - LED Lights #RM38FR - Non-LED Lights #RM-15267…

view full answer...

Answer 6

Hey James, dimensionally the Buyers Products hitch plate part #3371809061A will match up to the frame rails of your International but beyond that most likely would need to get welded in place as the holes wouldn't line up.

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The #30717 is exactly what you're looking for as long as you don't need the 7-way to supply anything other than lights on the trailer. You just plug the 4-ways together, connect the white ground wire to the vehicle's frame using the…

view full answer...

Answer 10

Unfortunately, the part number you mention will not work with the 2005 F150. You'll have to use the 4 Pole to 7 Pole Adapter. Plug the existing 4-way into the adapter and attach the blue, black, and purple wires to the wires going into the…

view full answer...

Answer 11

Yes, the Tow Randy replacement vehicle wiring harness #118247 is the correct harness for a 2004 Ford F-150 new body style. I have included a link to the installation instructions for you to view. You may also need a mounting bracket like #PK12711U.

view full answer...