Could Buyers Products Hitch Plate part # 3371809061A Fit 1999 International

Question

Question:

Will this fit international 4700 outside to outside of frame rails 34 1/4”.

asked by: James P

0

Expert Reply:

Hey James, dimensionally the Buyers Products hitch plate part # 3371809061A will match up to the frame rails of your International but beyond that most likely would need to get welded in place as the holes wouldn't line up.

expert reply by: Jameson C

0

Answer 1

Per Buyers Products' website, this hitch plate #3371809061A measures 17.2" tall by 62" long at the bottom and 34-1/4" long at the top (measured from inside the mounting bars) and is constructed with 1/2" thick steel. I've…

view full answer...

Answer 2

I would be happy to help you with that. I went out to the warehouse and took some measurements of the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065. The distance between the two wings on the top outside edge of the hitch…

view full answer...

Answer 3

The 34 inch trailer frame measurement is taken from outside to outside of the two frame channels. On older heavy duty vehicles like yours this is a very common size so most likely this would work for you. If this won't fit your best option would…

view full answer...

Answer 4

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

view full answer...

Answer 5

If your 2008 Chevy Silverado initially came with the cab and chassis body then you should be able to use the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC #3371809065. This is for the 3500 model and measures 17" tall by 62"…

view full answer...

Answer 6

I do have an option but all of the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumpers like part #3371809055 are designed for cab and chassis models which have the narrower frame rails. If you want to install one on a standard model which has…

view full answer...

Answer 7

We do have hitch fabrication parts for the 2016 Ford F-53 Chassis but there are no custom fit front mount receivers available at this time. You would need to a qualified fabricator to have a hitch welded on. The Buyers Products black receiver tube…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Could Buyers Products Hitch Plate part # 3371809061A Fit 1999 International

Product Page this Question was Asked From

Continue Researching