Replacement Handle For ARK Xtreme Off-Road Swing-Up Trailer Jack # ORJW750BD

Question

Question:

Hi! I lost the crank for this jack- it was probably left on a wheel well and fell off in the woods somewhere. Can I order a replacement crank?

asked by: Ramon N

0

Expert Reply:

We have the Replacement Jack Handle # ORJW750SH which will fit your Xtreme Off-Road Swing-Up Trailer Jack # ORJW750BD. This handle has a zinc finish as opposed to the black finish on your jack.

expert reply by: Bud M

0

Answer 1

Although the #30717 will work, I have a better suggestion for you. If your F150 is the New Body style, use part #118247. If you have the Old Body style, use #118242. Either connector will plug inline with your existing trailer connector, allowing you…

view full answer...

Answer 2

Yes, you will be able to also use the CIPA Universal Dual Lens Towing Mirrors #11953-2 as well on your 2019 Jeep Wrangler JL. I have sent this information to our fit guide team to have it updated since the mirrors on the 2020 Jeep Gladiator in the…

view full answer...

Answer 3

There is a replacement handle for the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels part #ORJW750D with Replacement Jack Handle for Extreme Off-Road Trailer Jack part #ORJW750SH.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

view full answer...

Answer 7

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

We do have potential options for you, but there are no bolt-on options that will be a direct fit for a 6" tall 3" wide frame. One option is to use the ARK Extreme Off-Road Swing-Up Trailer Jack #ORJW750BD. This jack is made to fit frames…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Replacement Handle For ARK Xtreme Off-Road Swing-Up Trailer Jack # ORJW750BD

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching