Dim Trailer Lights with Curt T-Connector Installed on 2017 Mazda CX-3 with Vehicle Off
Question:
Ive installed a C56300 on a 2017 CX-3, the first time I plugged my trailer on it, it worked perfectly but after that, the lights would stay on, very dimmed, but on all the time, even when the car is of. Ive then replace the module and the same situation rehappened. I doubt that the wiring on the trailer is the problem, since I used it on another car plenty of times, without any issues. Before I replace it again, what should I test or verify ?
asked by: Alexandre R
Expert Reply:
If sounds like you may have LED lights on the trailer you are towing your 2017 Mazda CX-3 with. What is likely happening is that is a little bit of power on the lighting circuits for the T-Connector # C56300 and since LEDs use next to no power that little bit of power is getting through to the LEDs. I confirmed this with my contact at Curt.
If this is the case then the only things you can really do is just unplug your trailer wiring when you will be leaving it parked for long periods of time or change out your LED trailer lights for incandescent bulbs. If you have incandescent bulbs on your trailer please let me know and I can help you troubleshoot further.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Ground Clearance Under Curt C11435 Installed on 2019 Mazda Miata
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Trunk Bike Rack
- Video: Curt Custom Fit Vehicle Wiring Installation - 2020 Mazda MX-5 Miata
- Q&A: How to Connect a Bushtec Quantum II Trailer to a 2016 Mazda Miata
- Q&A: What 4-Way Flat Connector Is Compatible With My 2020 Mazda 6
- Q&A: Trailer Hitch & Wiring For 2020 Mazda 6 Signature For Towing
- Q&A: Will Curt Trailer Hitch # C11435 be Visible after Installed on 2016 Mazda MX-5 Miata
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Locating Tail Light Wires on a 2013 Infiniti JX35 to Install the Curt 3 Wire to 2 Wire Converter
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 25580
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Shop: Fifth Wheel Hitch
- Search Results: dust cap