Draw-Tite Max-Frame Trailer Hitch Installation - 2022 Kia EV6 Video

Ahhh, I see the issue here. What Jon said was correct, I think there was just a misunderstanding on what the actual issue was. We did not have much information on the removal of the Thule WingBar Edge Crossbars #TH89FE from the Edge Raised Rail…

I checked with Draw-Tite and was able to confirm that the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT85GR is a fit for a 2023 Kia EV6. It's also our only confirmed option at this time. It features a bolt-on install without any…

If you notice chipped areas on your Draw-Tite Trailer Hitch #76020, for your 2018 Mazda CX-9, the best thing to do is lightly sand that area to get it evened out and then paint over it to prevent the rust from spreading. Since hitches are…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR is custom fit for your 2022 Kia EV6. This receiver has a 2" x 2" opening allowing you a larger selection of ball mounts and hitch mounted accessories. I recommend…

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR will fit your 2023 Kia EV6 GT. While we have not personally fit this on a GT in our facility Draw-Tite confirmed it will fit your GT trim. I have included an installation video below for…

Currently the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR is the only receiver we carry for your 2022 Kia EV6. Once Draw-Tite, Stealth or EcoHitch creates a hidden receiver and releases it to us we will add it to our website under the…

I have seen the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85GR installed on the GT models of your 2022 Kia EV6. While I have never seen a 1st edition like yours fit with the receiver I see no reason why it will not fit since the 1st edition was…

I don't have a precise ground clearance measurement for the Curt Class I #C11435 (nor does Curt), but as you can see in the provided photo, the receiver tube will sit flush against the underside of the bumper fascia. If you measure…

The 1-7/8" Hitch Ball #C40002 will require a 1-1/2" Socket #ALL643210. You will need a wrench that will open to 1-5/8" to hold the ball in place while torqueing the nut.

There is indeed a trailer wiring harness for your 2024 Kia EV6, with the correct part number being the following: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C97ZV

I apologize for any confusion this may have caused. The Curt Trailer Hitch Receiver #C77NR is confirmed to fit your 2023 Kia Niro EV, I was able to confirm this with the manufacturer.