Does Gen-Y Offer Weight Distribution System Shanks that Use Torsion Cushioning

Question

Question:

can you use a load leveler with these receivers

asked by: Ronald D

0

Expert Reply:

Gen-Y actually has cushioned weight distribution shanks that work with standard load leveler/weight distribution systems. For a 2 inch hitch we have the # GY54FR which can do a drop of up to 6-1/2 inches and for a 2-1/2 inch hitch version we have the part # 325-GH-1102.

expert reply by: Jameson C

0

Answer 1

For your 2021 Airstream, the important thing to consider when choosing a weight distribution system and a shock absorbing shank is the tongue weight. Yours is currently at 664 pounds, but this could change depending on what's in the trailer and…

view full answer...

Answer 2

Yes you can use the lower rated Gen-Y Torsion weight distribution shank part #GY54FR which matches your tongue weight range as well as drop requirement. You would need a sleeve adapter like you mentioned as well like with the #325-GH-007 and…

view full answer...

Answer 3

There would be no way to use the Gen-Y Glyder Shock Absorbing Ball Mounts with a weight distribution system but not to worry, Gen-Y does offer the Gen-Y Torsion Weight Distribution Shanks like part #GY54FR which have built-in cushioning and are…

view full answer...

Answer 4

While I can certainly understand wanting to add an extension for your clearance issues, a hitch extender cannot be used with a weight distribution system, though there is an option that can help, which is a longer shank for your weight distribution…

view full answer...

Answer 5

The Equal-i-zer Weight Dist Shank part #EQ90-02-4500 has a 1,400 lb tongue weight capacity. If you are using this shank on a system rated for less, this won't increase the capacity of the system but it can decrease the capacity of the system if…

view full answer...

Answer 6

That's a very cool bike so I can see why you want to bring it but the issue is that any type of extension is going to reduce your tongue weight capacity by 50 percent which is not something you will be able to do. The only thing you can do to add…

view full answer...

Answer 7

You could upgrade your axles to a higher capacity, however it isn't really recommended since it can create a rougher ride. Since you've got 3,500 lb axles I'd stick with those and upgrade your suspension with the SumoSprings Trailer…

view full answer...

Answer 8

If you want to just add on some sort of extension you can use Safety Chain Quick Link #C82932 which has a working load limit of 3300-lbs. This will give you about 3-inches additional length. Ideally trailer safety chains will be one continuous chain,…

view full answer...

Answer 9

Between the Shocker Hitch and Gen-Y Torsion ball mount, I recommend the Gen-Y. Its rubber torsion arms are going to absorb road shock naturally due to its design, while the Shocker Hitch requires constant maintenance that isn't needed with the…

view full answer...

Answer 10

Yes, there is one weight distribution shank that will fit a 3" hitch receiver. It is the Gen-Y Torsion Weight Distribution Shank item #GY92RR. This shank has a massive 21,000 lbs towing capacity and a 2,400 lbs tongue weight. It has holes that…

view full answer...

Answer 11

With the Gen-Y Cushioned Weight Distribution Shank part #GY92RR you could use the ball mount adapter part #BA-1 so that you could use a 2-5/16 inch hitch ball like the #BWHB94050 and you'd be set. This would limit the setup to towing a 10,000 lb…

view full answer...

Answer 12

The Gen-Y Torsion Weight Distribution Shank #GY92RR is currently going to be our only shank that fits a 3" receiver on your 2022 Ford F-350 Super Duty. The tongue weight rating of 1,600lbs - 2,400lbs is the ideal weight rating for the torsion…

view full answer...