Can the Gen-Y Glyder Shock Absorbing Ball Mounts Be Used With Weight Distribution Systems

Question

Question:

Is is possible to use a Weight Distributing Hitch with the Gen-Y Glyder in either height configuration 2inch or 6. We are looking at solutions for a 20-22foot Airstream, 500-550lb tongue, 5000lb GVWR for towing behind an SUV with 7000lb / 700lb tongue SUV for cross country trips. Thanks

asked by: John M

0

Expert Reply:

There would be no way to use the Gen-Y Glyder Shock Absorbing Ball Mounts with a weight distribution system but not to worry, Gen-Y does offer the Gen-Y Torsion Weight Distribution Shanks like part # GY54FR which have built-in cushioning and are weight distribution compatible.

expert reply by: Conner L

0

Answer 1

As long as you are using the factory coil springs on your 2013 Toyota FJ Cruiser then the 2-1/2" lift kit you have in the rear will not be a problem. If you have a set of taller/stiffer aftermarket coil springs then you would need to test these…

view full answer...

Answer 2

Adding suspension enhancement like Timbrens will help with sag and increase stability and ride quality. If your 2011 Toyota FJ Cruiser is a 4-wheel drive model, for the front you can use #TTOFTAC4A that you have referenced. There is no option for the…

view full answer...

Answer 3

For the Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches #325-GH-12001, there is unfortunately no way that you'd be able to use a weight distribution system. I do have another solution though. Sticking with a cushioned Gen-Y ball…

view full answer...

Answer 4

I do have an option for you but if the weight distribution system is sway control compatible then there will be a tab on one or either side of the head which you can attach a friction sway control device to such as the Reese Friction Sway Control Kit…

view full answer...

Answer 5

In regards to choosing the correct weight distribution shank, you really only need to pay attention to the hitch size and rise/drop. The brand won't matter as much as they are all pretty much universal in this regard. The Equal-i-zer Weight Dist…

view full answer...

Answer 6

When using a single set of tire chains on a vehicle that is 4 wheel drive or all wheel drive you want to install the chains on the primary drive axle. Typically this will be listed in the owner's manual. But for a 4WD drive vehicle the axle to…

view full answer...

Answer 7

For your Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop, 3-1/2" Rise - 7K #325-GH-12001 we have the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome #e98880. This lock fits…

view full answer...

Answer 8

The Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 has a bolt pattern that is unique to the Glyder. There are currently no Pintle style attachments that share that bolt pattern. I would recommend changing out your pintle trailer connection for…

view full answer...

Answer 9

The Gen-Y Glyder for 2 inch hitches part #325-GH-12001 that you referenced is designed to be used with a 5/8 inch hitch pin like the #PC3.

view full answer...

Answer 10

Unfortunately, the Reese #RP26003 wouldn't be compatible with the ball platform of the Gen-Y #325-GH-12001. However, Curt tells me that the ball platform of the #C45949 Curt Rebellion is about 2-5/8 inches in width, which is the largest width…

view full answer...

Answer 11

I spoke with Gen-Y about the Gen-Y Glyder Shock Absorbing Ball Mount part #325-GH-12001 and they informed me that it can indeed be used with a trailer that has surge brakes. Therefore, the up and down cushioning mechanism will not have any affect on…

view full answer...

Answer 12

For your application I recommend checking out the Curt RockerBall Shock Absorbing 2" Hitch Ball which comes with a 3/4" diameter shank as part #C94CR or with a 1" diameter shank as part #C40047. This unique hitch ball absorbs the shock…

view full answer...

Can the Gen-Y Glyder Shock Absorbing Ball Mounts Be Used With Weight Distribution Systems

Product Page this Question was Asked From

Continue Researching