Does etrailer & Curt Trailer Hitch for 2019 Jeep Grand Cherokee Come With Mounting Hardware

Question

Question:

Hello, Im fixing to purchase the following hitch for my 2019 Jeep Grand Cherokee and want to confirm the mounting bolts are included or if I need to purchase separate. Please advise, etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 - e98901

asked by: Christie M

0

Expert Reply:

There is actually no hardware that comes with or is needed to purchase separately for the etrailer Trailer Hitch Receiver # e98901 or its counterpart, the Curt Trailer Hitch Receiver # C13182, both of which fit your 2019 Jeep Grand Cherokee (the only difference being the black matte finish of the etrailer hitch vs. the glossier black of the Curt).

The reason why is that the hitch will install with existing bolts on your 2019 Grand Cherokee, as you can see by the accompanying cut out of the linked directions, and no other bolts are required.

I have added a link below to a video showing an install on a 2019 Jeep Grand Cherokee of the Curt Trailer Hitch Receiver # C13182.

The process will be exactly the same for the etrailer Trailer Hitch Receiver # e98901.

Additionally, if you need a trailer wiring harness, the correct part for your Cherokee depends on if you have the factory tow package or not. If you DO have the factory tow package the correct harness is T-One Vehicle Wiring Harness # 118384. If you do NOT have the factory tow package the harness you need is the T-One Vehicle Wiring Harness # 118727.

To mount it you can use Brophy Mounting Bracket for 4-Pole Flat Trailer Connector # BK4F with No-Drill Mount for Electrical Mounting Bracket # 18140.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Does etrailer & Curt Trailer Hitch for 2019 Jeep Grand Cherokee Come With Mounting Hardware

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching