Recommended Sway Control Solution for 2016 Subaru Outback Towing 2020 Nobo 10.5 Trailer

Question

Question:

My tow vehicle is a 2016 Subaru outback. The hitch receiver is 1-1/4". The tongue weight capacity is about 200 lbs and we're at that limit pulling a 2020 Nobo 10.5. The Nobo has a 2" ball. The dry weight of the trailer is 2000 lbs and GVWR is about 4000 lbs, but the tow limit is 2700 lbs in the Outback. I know we're really pushing the weight limit on the TV and we're planning to get a truck in the future, but until then, wonder if we can minimize the sway.

asked by: Bruce R

1

Helpful Expert Reply:

I know just what you're looking for! There is not a weight distribution system that can be used with 1-1/4" hitches, so a full system with sway control is not an available option. Instead, I recommend using the Reese Friction Sway Control Kit # 83660 and Reese Sway-Control Bracket for 1-1/4" Drawbars - Class II # RP26005. This kit will help control the sway on your Nobo trailer.

If you don't have a Class II ball mount like the # C45521 for your setup already, you will need to add one to make this work. This particular ball mount works with hitch balls that have a 3/4" shank like the # A-80 (1-7/8) or # A-82 (2").

expert reply by: Erik B

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...