Skid Wheels for 32' 2020 Pioneer BH270

Question

Question:

what size kid wheel do I need for 32 ft Coleman 2020 pioneer BH270

asked by: Warren N

0

Expert Reply:

For your 32' 2020 Pioneer BH270, I recommend the Ultra-Fab Skid Wheels # UF48-979012. These are 5" diameter urethane wheels for RVs up to 34' long. This includes two casters and two mounting brackets that weld onto your trailer RV frame to allow you to attach the casters with the provided bolts. Check out the video linked below for more details.

expert reply by: John R

0

Answer 1

Yes, the Ultimate Trailer Jack part #322-RDJ-2K is the perfect option to prevent bottoming out the tongue jack since you can adjust the shaft on the base to ensure you have as much ground clearance as possible. It also makes lifting and lower the…

view full answer...

Answer 2

view full answer...

Answer 3

We don't offer airbags, like what is normally installed on a tow vehicle, for trailers. We do have jounce-style helper springs that may work for you. The Timbren Trailer Suspension Enhancement System #TTRA1702 install onto your trailer's…

view full answer...

Answer 4

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, #UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, #UF48-979013, 7-3/4 inches. I have attached a photo for you showing these…

view full answer...

Answer 7

For your 30 foot 5th wheel I really like the frame mount skid wheels that can swivel. For that the Ultra Fab kit part #UF48-979011 would be your best option. I attached a picture that shows these attached to a trailer frame as well. These don't…

view full answer...

Answer 8

Here are the instructions for Swivel Skid Wheels #UF48-979012 1. Position a board as shown in Illustration 1. Place one end of board just behind rear wheels. Prop up the other end of board so board comes in contact with the lowest point of RV’s rear…

view full answer...

Answer 9

Yes, the Fogatti RV Tankless Water Heater part #LSB44FR will work great as a replacement for an Atwood water heater GC10A-4E.

view full answer...

Answer 10

Yes we do have some rollers available for your 45' RV I recommend the Ultra-Fab Steel Jumbo Roller for Trailers and RVs part #UF48-979023. This is a steel roller versus the lighter duty Ultra-Fab Skid Wheels for Low-Profile RVs up to 30' Long…

view full answer...

Answer 11

You could mount some skid wheels to the frame by your stabilizers to have them hit first and protect the stabilizers and the rest of the undercarriage from scraping when coming out of a steep incline/decline. I recommend ones like the Ultra-Fab Skid…

view full answer...

Answer 12

There are three ports on the MB Sturgis High Capacity Auto Changeover Regulator 108260. The two 1/4" female inverted flare inlets will attach to the propane tanks with a hose like the MB Sturgis Propane Pigtail part #100575-12-MBS and the single…

view full answer...